Z-Spec Engine Bay Dress Up Kits

ZSPEC's Stage-2 Dress Up Bolts™ Fastener Kit for the Audi S5 B8 EA837 3.0L is a 112-piece dress-up hardware kit addressing the most visible fasteners.

The kit hardware is grade-5 titanium - known for it's striking visual appearance, lightweight (~40% less than steel) and corrosion-resistant. ZSPEC titanium kits provide the deepest coverage and value while providing a clean updated appearance.

Kit coverage includes:

Headlights
Headlight Adjustment Screws
Front Cross-Brace
Fenders
Coolant Reservoir
Upper Hood Hinges Nuts
Lower Hood Hinges Bolts
Front Struts
Throttle Body to Plenum Fitting
Intake Sensors
Upper Plenum Nuts
Plastic Wiring Covers (between Valve Covers & Plenum)  
Engine Hooks
License Plates
Door Jams - Strikers & Latches
Misc. Brackets & Extras

The ZSPEC Dress Up Bolts® Door Strikers & Latches Fastener Kit for Audi S5 B8 EA837 3.0L models is a grade-5 titanium hardware kit. 

Titanium is known for it's striking visual appearance, lighter weight (~40-45% less than steel) and corrosion-resistance. This kit replaces Strikers and Latches hardware in your choice of finishes.

ZSPEC titanium kits provide a clean updated appearance.

What's in the Box?
Grade-5 Titanium Hardware, thoughtfully organized by area.

Basic hand-tools required for installation (not included).

ZSPEC's Stage-2 Dress Up Bolts™ Fastener Kit for the Audi S5 B8 EA837 3.0L is a 124-piece dress-up hardware kit addressing the most visible fasteners.

The kit's fasteners are SUS304 Stainless Steel and colored finish washers are billet-aluminum.  ZSPEC Stainless-Billet fastener kits provide the deepest coverage and value while providing a clean updated appearance.

Kit coverage includes:
Headlights
Headlight Adjustment Screws
Front Cross-Brace
Fenders
Coolant Reservoir
Upper Hood Hinges Nuts
Lower Hood Hinges Bolts
Front Struts
Intake Sensors
Upper Plenum Nuts
Plastic Wiring Covers (between Valve Covers & Plenum) 
Engine Hooks
License Plates
Misc. Brackets & Extras

What's in the Box?
SUS304 Silver Stainless Fasteners and Billet-Aluminum Colored Finish Washers, thoughtfully organized by area.
Installation Guide

Requires basic hand-tools for installation (not included).

ZSPEC's Stage-3 Dress Up Bolts™ Fastener Kit for the Audi S5 B8 EA837 3.0L is a 196-piece dress-up hardware kit addressing the most visible fasteners.

The kit hardware is grade-5 titanium - known for it's striking visual appearance, lightweight (~40% less) and corrosion-resistant. ZSPEC titanium kits provide the deepest coverage and value while providing a clean updated appearance.

Kit coverage includes:
Headlights
Headlight Adjustment Screws
Front Cross-Brace
Fenders
Coolant Reservoir
Upper Hood Hinges Nuts
Lower Hood Hinges Bolts
Front Struts
Throttle Body
Throttle Body to Plenum Fitting
Intake Sensors
Upper Plenum Nuts
Plastic Wiring Covers (between Valve Covers & Plenum) 
Engine Hooks
Valve Covers
License Plates
Door Jams - Strikers & Latches
Misc. Brackets & Extras

ZSPEC Dress Up Bolts® Trunk Fastener Kit for '12-18 Audi A7 4G8 3.0L, Stainless & Billet

The kit's fasteners are SUS304 Stainless Steel and colored finish washers are billet-aluminum.  ZSPEC Stainless-Billet fastener kits provide the deepest coverage and value while providing a clean updated appearance.

Kit covers exposed fasteners in the Trunk-Area.

What's in the Box?
SUS304 Silver Stainless Fasteners and Billet-Aluminum Colored Finish Washers, thoughtfully organized by area.
Installation Guide

Requires basic hand-tools for installation (not included).

ZSPEC's Stage-1 Dress Up Bolts™ Fastener Kit for the Audi S5 B8 EA837 3.0L is a 86-piece dress-up hardware kit addressing the most visible fasteners.

The kit hardware is grade-5 titanium - known for it's striking visual appearance, lightweight (weighing 40-45% less than steel) and corrosion-resistant. ZSPEC titanium kits provide the deepest coverage and value while providing a clean updated appearance.

Kit coverage includes:
Headlights
Headlight Adjustment Screws
Front Cross-Brace
Fenders
Coolant Reservoir
Upper Hood Hinges Nuts
Front Struts
Upper Plenum Nuts
License Plates
Misc. Brackets & Extras

ZSPEC's Stage-3 Dress Up Bolts™ Fastener Kit for the Audi S5 B8 EA837 3.0L is a 190-piece dress-up hardware kit addressing the most visible fasteners.

The kit's fasteners are SUS304 Stainless Steel and colored finish washers are billet-aluminum.  ZSPEC Stainless-Billet fastener kits provide the deepest coverage and value while providing a clean updated appearance.

Kit coverage includes:
Headlights
Headlight Adjustment Screws
Front Cross-Brace
Fenders
Coolant Reservoir
Upper Hood Hinges Nuts
Lower Hood Hinges Bolts
Front Struts
Throttle Body
Throttle Body to Plenum Fitting
Intake Sensors
Upper Plenum Nuts
Plastic Wiring Covers (between Valve Covers & Plenum) 
Engine Hooks
Valve Covers
License Plates
Misc. Brackets & Extras

What's in the Box?
SUS304 Silver Stainless Fasteners and Billet-Aluminum Colored Finish Washers, thoughtfully organized by area.
Installation Guide

Requires basic hand-tools for installation (not included).

ZSPEC's "Stage 1" Dress Up Bolts™ Fastener Kit for the Audi S5 B8 EA837 3.0L is a 96-piece dress-up hardware kit addressing the most visible fasteners.

The kit's fasteners are SUS304 Stainless Steel and colored finish washers are billet-aluminum.  ZSPEC Stainless-Billet fastener kits provide the deepest coverage and value while providing a clean updated appearance.

Kit coverage includes: 

Headlights
Headlight Adjustment Screws
Front Cross-Brace
Fenders
Coolant Reservoir
Upper Hood Hinges Nuts
Front Struts
Upper Plenum Nuts
License Plates
Misc. Brackets & Extras

What's in the Box?
SUS304 Silver Stainless Fasteners and Billet-Aluminum Colored Finish Washers, thoughtfully organized by area.
Installation Guide

Requires basic hand-tools for installation (not included).

ZSPEC's "Stage 2" Dress Up Bolts™ Fastener Kit for '12-18 A7 4G8 3.0L is a 194-piece dress-up hardware kit addressing the most visible fasteners.

The kit's fasteners are SUS304 Stainless Steel and colored finish washers are billet-aluminum.  ZSPEC Stainless-Billet fastener kits provide the deepest coverage and value while providing a clean updated appearance.

Kit coverage includes:

Hood Catches on Hood
Hood Struts
Hood Hinge Top Nuts
Fenders
Exposed Bottom Hood Hinge Bolts
Headlights
Positive Battery Ground Bracket
Valve Covers
Upper Plenum
Throttle Body
Plastic Finishers between Upper Plenum & Valve Cover
Sensor on Upper Intake Sensor
Coolant Reservoir
License Plate Fasteners
Misc. Sensor Brackets & Extras

What's in the Box?
SUS304 Silver Stainless Fasteners and Billet-Aluminum Colored Finish Washers, thoughtfully organized by area.
Installation Guide

Requires basic hand-tools for installation (not included).

ZSPEC Dress Up Bolts™ Trunk-Area Fastener Kit for '18-22+ A5 8W6 2.0L is a 12-piece dress-up hardware kit addressing the rear hatch-area bumpers. 

This kit leverages stainless fasteners with billet-aluminum colored finish washers to provide incredible visual enhancement to your vehicle. 

What's in the Box?
SUS304 Silver Stainless Fasteners and Billet-Aluminum Colored Finish Washers, thoughtfully organized by area.
Installation Guide

Requires basic hand-tools for installation (not included).

ZSPEC's "Stage 2" Dress Up Bolts™ Fastener Kit for '18-22+ A5 8W6 2.0L is a 120-piece dress-up hardware kit addressing the most visible fasteners.

This kit leverages stainless fasteners with billet-aluminum colored finish washers to provide incredible visual enhancement to your vehicle. 

Kit coverage includes:

Headlights
Hood Catches on Hood
Hood Struts
ECU Bracket
Coolant Reservoir
Front Struts
Strut-Tower Braces
Positive Battery Ground Bracket
Front Plastic Engine Cover
Rear Hatch Area Bumpers
Fender/Hood Jam Nuts
License Plates & Extras

What's in the Box?
SUS304 Silver Stainless Fasteners and Billet-Aluminum Colored Finish Washers, thoughtfully organized by area.
Installation Guide

Requires basic hand-tools for installation (not included).

ZSPEC's "Stage 1" Dress Up Bolts™ Fastener Kit for '18-22+ A5 8W6 2.0L is a 96-piece dress-up hardware kit addressing the most visible fasteners.

This kit leverages stainless fasteners with billet-aluminum colored finish washers to provide incredible visual enhancement to your vehicle.  Note - our Stage-1 kit does not provide Trunk Area or Factory Airbox fasteners like our Stage-2 kit.

Kit coverage includes:
Headlights
Hood Catches on Hood
Hood Struts
ECU Bracket
Coolant Reservoir
Front Struts
Strut-Tower Braces
Positive Battery Ground Bracket
Front Plastic Engine Cover
Fender/Hood Jam Nuts
License Plates & Extras

What's in the Box?
SUS304 Silver Stainless Fasteners and Billet-Aluminum Colored Finish Washers, thoughtfully organized by area.
Installation Guide

Requires basic hand-tools for installation (not included).

Experience the ultimate visual upgrade for your Audi A4 B7 3.0L engine bay with ZSPEC's Stage 2 Dress Up Bolts® Fastener Kit. 

This premium kit includes 230+ pieces, crafted with the finest stainless steel fasteners and stunning billet-aluminum colored accents. From under-hood to outside the bay, this kit covers 95% of visible fasteners, providing a breathtaking enhancement for your ride. Elevate your Audi A4 to the next level with the ultimate ZSPEC Kit.

Kit coverage includes:

Fenders (includes silicone washers to help protect paint)
Headlights
Front-Cross-Bar
Grille
Hood Catch
Hood Hinges
Cabin Air Filter Cover
Fuel Injector Rails
Plenum
Valve Covers
License Plates
Misc. Brackets and extras for custom needs are included.

What's in the Box?
SUS304 Silver Stainless Fasteners and Billet-Aluminum Colored Finish Washers, thoughtfully organized by area.
Installation Guide

Requires basic hand-tools for installation (not included).

ZSPEC's Trunk-Area Fastener Kit for the '18-23+ A5 8W6 2.0L is a 6-piece dress-up hardware kit addressing the rear hatch-area bumpers. 

The kit's hardware is grade-5 titanium, known to be lightweight (~40% less than OE hardware) and provides incredible visual enhancement to your vehicle.

What's in the Box?
Grade-5 Titanium Hardware - Bolts, Washers & Nuts 
Bagged and Labeled by function to ease installation.
Basic installation guide included.

Requires basic hand-tools for installation (not included).

ZSPEC's Stage-1 Dress Up Bolts™ Fastener Kit for '12-18 A7 4G8 3.0L is a 122-piece dress-up hardware kit addressing the most visible fasteners.

The kit's hardware is grade-5 titanium, known to be lightweight (~40-45% less than OE hardware) and provides incredible visual enhancement to your vehicle. 

Kit coverage includes:

Hood Catches on Hood
Hood Struts
Hood Hinge Top Nuts
Fenders
Exposed Bottom Hood Hinge Bolts
Headlights
Positive Battery Ground Bracket
Upper Plenum
Throttle Body
Plastic Finishers between Upper Plenum & Valve Cover
Sensor on Upper Intake Sensor
Coolant Reservoir
License Plate Fasteners
Misc. Sensor Brackets & Extras
Misc. Brackets/Extras