New Vorsprung Products

Experience ultimate performance with our Forged "Rotor" Style Wheels. Engineered for your Audi, these custom wheels are available in a variety of sizes and colors. Their lightweight design not only enhances speed and handling, but also adds a sleek touch to your vehicle. Upgrade your ride today.

Pushing your supercharged 3.0T beyond a single pulley setup seriously strains the factory catalytic converters, often leading to failure and even potential engine damage if not addressed properly.

After dealing with countless cheap, unreliable test pipes that didn’t hold up, we set out to create a long-lasting, high-quality solution. Unlike competitors, we used the highest quality 400 cell s-woven metallic substrate catalytic converters.  Why 400 cell? Noise and smell.  The largest complaint with test pipes is the noise they introduce. 

High-performance vehicles rely on 400-cell catalysts, such as GESI, as the industry standard for optimal efficiency and emissions compliance. However, manufacturers compromise quality by using lower-grade 200-cell or 300-cell ceramic catalysts to maximize profits. 

At Vorsprung Autowerk, we refused to make that sacrifice. Instead, we sourced a cost-effective alternative that delivers the same level of performance without compromising quality. These are the highest-quality, non-branded catalysts we could source, designed to withstand temperatures exceeding the maximum operating limits of the 3.0T platform. Emissions testing is underway with our beta users to ensure compliance and reliability. Additionally, we incorporated a layer of heat shielding to mitigate heat soak, safeguard critical engine components, and, most importantly, optimize exhaust velocity and flow. This ensures maximum performance while effectively directing heat dissipation out of the exhaust system where it belongs.

A 12-month, unlimited-launch warranty is provided against catalyst failure.

At Vorsprung Autowerk, we don't sell anything we wouldn't use faithfully on our own cars. This is the upgrade your 3.0T deserves.

Key Features:

400-cell s-woven metallic substrate HO catalysts
2.0mm 304L Stainless
2.5in with smooth transition to OEM-spec bottom flanges
100% TIG welded and back purged
Double-walled pipe ends
10mm T304 stainless flanges, welded inside and reinforced outside to prevent common flange warping/cracking
1/8” T304 stainless mounting brackets
True 2.5” with 2.5” flanges, no tapering down to OEM size

Fitment:

2009-2016 Audi B8/B8.5 A4/S4 3.0T
2007-2017 Audi B8/B8.5 A5/S5 3.0T
2012-2018 Audi 8R Q5/SQ5 3.0T
2011-2018 Audi C7/C7.5 A6 3.0T
2010-2018 Audi C7/C7.5 A7 3.0T
2011-2018 Audi D4 A8 3.0T
Does not fit: C6 A6, 4L Q7, 4M Q7

Upgrade your driving experience with the Vorsprung AutoWerk TruShift Mount, engineered for enhanced stability, precision, and performance. Featuring 65 durometer rubber upgrades throughout, this mount delivers the perfect balance of vibration dampening and drivetrain rigidity, ensuring smoother shifts and improved power transfer.

Designed to reduce drivetrain movement under acceleration and hard cornering, the TruShift Mount enhances throttle response and shift feel without introducing excessive cabin vibrations. Whether you're daily driving or pushing your car to the limits on the track, this upgrade provides the durability and control you need.

Key Features:

65 Durometer Rubber – Increased stiffness over stock mounts for better shift precision and reduced drivetrain slop.
Optimized Design – Engineered for improved power transfer and enhanced stability under load.
Durability & Comfort – Maintains drivability while reducing unwanted drivetrain movement.
Direct Fitment – Simple bolt-on installation with no modifications required.
Take control of your driving experience with the Vorsprung AutoWerk TruShift Mount—precision, performance, and durability in one upgrade.

Fitment:

Upgrade your driving experience with the Vorsprung AutoWerk TruShift Mount, engineered for enhanced stability, precision, and performance. Featuring 65 durometer rubber upgrades throughout, this mount delivers the perfect balance of vibration dampening and drivetrain rigidity, ensuring smoother shifts and improved power transfer.

Designed to reduce drivetrain movement under acceleration and hard cornering, the TruShift Mount enhances throttle response and shift feel without introducing excessive cabin vibrations. Whether you're daily driving or pushing your car to the limits on the track, this upgrade provides the durability and control you need.

Key Features:

65 Durometer Rubber – Increased stiffness over stock mounts for better shift precision and reduced drivetrain slop.
Optimized Design – Engineered for improved power transfer and enhanced stability under load.
Durability & Comfort – Maintains drivability while reducing unwanted drivetrain movement.
Direct Fitment – Simple bolt-on installation with no modifications required.
Take control of your driving experience with the Vorsprung AutoWerk TruShift Mount—precision, performance, and durability in one upgrade.

Fitment:

Product: Next Level 6010 Men's Triblend Crew

• 4.3 oz.,
• Tri-blend (50% polyester/25% combed ringspun cotton/25% rayon jersey)
• Fabric laundered for reduced shrinkage
• 1x1 baby rib-knit set-in collar
• Soft, satin label
• Sideseamed
• Shoulder to shoulder taping
• Tear-away label

Experience ultimate performance with our Forged E-TRON "Rotor" Style Wheels. Engineered for your Audi, these custom wheels are available in a variety of sizes and colors. Their lightweight design not only enhances speed and handling, but also adds a sleek touch to your vehicle. Upgrade your ride today.

Upgrade your Audi's braking system with ease using the Vorsprung Autowerk's BBK Adapter. Designed specifically for use with Audi Q7/Q8 and RS5 calipers and S6 400mm rotors, this adapter allows for a more efficient and powerful braking experience. Enjoy the benefits of increased stopping power and improved performance.

Features:

• Utilizes OEM Q7 and RS5 6-pot large calipers
• Designed to accommodate readily available C7 and C7.5 Audi S6 400mm rotors 
• 7070-T6 Aluminum for better than OEM mounting strength
• 12.9 grade hardware
• Slick black anodized finish with Vorsprung Autowerk Logo
• You can source your rotors and calipers or buy a customized set from us.

Kit requirements:

Left Caliper -  4M0615107BS or 8W0615107AM

Right Caliper - 4M0615108BS or 8W0615108AM

Rotors - 4H0615301AL

Fitment:

For Audi B8/B8.5 S4, A4 , A5, S5 and C7/C7.5 A6/S6/A7