Sehr Gut Divorced Supercharger Cooling Ports, Audi 3.0T EA837 (S4, S5, A6, A7, SQ5, Q5)
The OEM Bottleneck Nobody Talks About
The Sehr Gut Divorced Supercharger Cooling Port Kit is a set of 4 bolt-on port adapters with new OE gaskets that opens up the small factory coolant ports on the OEM supercharger intercooler of Gen 1 (non-CREC) Audi 3.0T EA837 engines, fitting the 2010-2016 S4, 2010-2017 S5, 2013-2017 Q5, 2014-2017 SQ5, 2009-2015 A6, 2011-2015 A7, 2010-2014 A8 and 2009-2015 Q7.
Tired of your engine's anemic, tiny little coolant ports? Yeah, we were too. The factory ports connecting your supercharger's intercooler to the cooling system were sized for a quiet commute, not a car that's actually being driven. Push more boost through that intercooler and those stock ports become the exact bottleneck choking the coolant flow you need.
The Sehr Gut Divorced Supercharger Cooling Port Kit bolts straight onto your OEM intercooler and opens the path up, no cutting, no custom fabrication, no kidney required (you'll need both of those for the rest of your build).
- ✅ Complete kit: four upgrade port adapters plus a full set of new OE gaskets
- ✅ Bolt-on fit: mounts directly to your OEM supercharger intercooler, no modification required
- ✅ 18mm outlet: sized for a 5/8" hose and clamps, or a 3/4" shrink-fit hose
- ✅ Works with OEM or aftermarket coolant setups, including divorced-loop builds
Bottom line: bigger ports, better flow, same bolt pattern. The upgrade your OEM intercooler should've shipped with.
NOTE: Hoses and clamps are not included. The 18mm outlet is sized to accept a readily available 5/8" hose and clamps or a 3/4" shrink-fit hose, so you can run whatever routing your build needs.
Vehicle Fitment
This kit bolts onto the OEM supercharger intercooler used on Gen 1 (non-CREC) Audi 3.0T EA837 supercharged engines, covering the vehicles below. It does not fit Gen 2 CREC-engine vehicles — see the note below the table.
| Make | Model | Chassis | Years | Engine |
|---|---|---|---|---|
| Audi | S4 / S5 | B8 / B8.5 | 2010-2016 (S5 2010-2017) | 3.0T V6 Supercharged (Gen 1 EA837) |
| Audi | Q5 / SQ5 | B8.5 | 2013-2017 (SQ5 2014-2017) | 3.0T V6 Supercharged (Gen 1 EA837) |
| Audi | A6 | C6 / C7 | 2009-2015 | 3.0T V6 Supercharged (Gen 1 EA837) |
| Audi | A7 | C7 | 2011-2015 | 3.0T V6 Supercharged (Gen 1 EA837) |
| Audi | A8 | D4 | 2010-2014 | 3.0T V6 Supercharged (Gen 1 EA837) |
| Audi | Q7 | 4L | 2009-2015 | 3.0T V6 Supercharged (Gen 1 EA837) |
S5 / A5 NOTE: 2010-2012 fitment is the S5 Cabriolet only (the 2008-2012 S5 coupe has the 4.2 V8). The A5 was never sold with the supercharged 3.0T in North America; the European-market B8.5 A5 3.0 TFSI (2012-2016) uses the same EA837 engine, so confirm your engine code before ordering.
NOTE: This kit fits the Gen 1 (non-CREC) EA837 supercharger intercooler only. It does NOT fit Gen 2 CREC-engine vehicles (2016-2018 A6, A7, and Q7, or 2015-2018 A8), which use a different intercooler and port design. Not sure which generation you have? Email us your VIN at help@vorsprungautowerk.com and we'll confirm before you order.
Divorced Supercharger Cooling Port Kit FAQ
What's included?
A complete kit of 4 upgrade port adapters plus a set of new OE gaskets.
Are hoses or clamps included?
No. This kit is the port adapters and gaskets only. The 18mm outlet is sized for a 5/8" hose and clamps, or a 3/4" shrink-fit hose, so you can run whatever routing your build calls for.
Is this the same as a "divorced" supercharger cooling port setup?
Yes. "Divorced" cooling ports is the term the Audi 3.0T community uses for opening up the stock bottleneck between the coolant system and the supercharger intercooler. This kit is the port-adapter half of that mod, and it bolts directly onto your OEM intercooler.
What hose size do these fit?
The 18mm outlet works with either a 5/8" hose and clamps or a 3/4" shrink-fit hose.
Is this a bolt-on installation?
Yes, these bolt directly onto your OEM supercharger intercooler with no modification required.
Will this fit my Audi?
Check the Vehicle Fitment table above - these fit the Gen 1 (non-CREC) OEM supercharger intercooler used across the Audi 3.0T EA837 platform through the years listed.
Does this fit a 2016+ A6, A7, Q7, or 2015+ A8 (Gen 2 CREC engine)?
No. Gen 2 CREC-equipped vehicles use a different supercharger intercooler with a different port design, and this kit is not compatible. If you're not sure which generation your car has, email us your VIN at help@vorsprungautowerk.com and we'll confirm before you order.
Why Buy From Us?
-
✅
Enthusiast Designed & Tested: Developed by people who actually drive and modify these cars.
-
✅
Tested on Our Own Cars: If we wouldn't run it ourselves, we don't sell it.
-
✅
Continuous R&D: We continually develop and improve our products instead of relying on generic catalog parts.
-
✅
Supporting Audi Platform Development: Your purchase helps fund continued development of new parts for these chassis.
-
✅
Real Enthusiast Support: Get help from people who understand the platform, not ticket bots.
-
✅
Small Team, Big Passion: Every order directly supports continued product development and innovation.
-
✅
Performance Without the Marketing Fluff: Purpose-built parts designed to perform.
Complete Your Build
Already in the supercharger valley? Pair this with:
- 3.0T Oil Check Valve Set (Timing Chain Tensioner) — stop the cold-start rattle while you're already working in the same valley.
- Audi Crankcase Vent Valve 06E103245E — the other common failure point on the EA837 platform, worth doing in the same service window.
Shop More Parts for Your Audi
Browse every Vorsprung part for your chassis: Audi S4 & S5 B8/B8.5 parts · Audi A6 & A7 C7/C7.5 parts · Audi A8 D4 parts · Audi Q5 & SQ5 B8/B8.5 parts · Audi Q7 4L/4M parts. Or see all Audi 3.0T performance parts.
Drive the difference. Drive Vorsprung.
Sehr Gut Divorced Supercharger Cooling Ports, Audi 3.0T EA837 (S4, S5, A6, A7, SQ5, Q5)
Frequently Asked Questions (FAQ)
What types of products do you offer?
We offer a wide range of high-performance automotive parts including engine components, suspension upgrades, fueling solutions, and custom wheels, all designed to enhance your vehicle’s performance.
Are your products compatible with all car models?
Our products are specifically designed for high-performance vehicles, including luxury and sports cars like Audi. For compatibility details, please refer to the product description or contact our support team for assistance.
How can I ensure the correct fit for my car?
We offer guided fitment assistance for all our products. If you're unsure, feel free to reach out to our customer support team, and we'll help you find the perfect fit for your vehicle.
Where do you ship?
We currently ship to the United States and Canada, with free US shipping on orders over $425. Outside North America? Email orders@vorsprungautowerk.com with your part and address and we'll quote shipping for you.
How do I install the products?
Most of our products come with easy-to-follow installation guides. Additionally, if you need professional installation, we can recommend certified mechanics or shops for assistance.
What is your return policy?
We offer a 14-day return policy for unused products. To be eligible for a return, items must be in their original packaging and in resellable condition. Please refer to our return policy page for detailed instructions.
How can I contact customer support?
You can contact our customer support team via email at orders@vorsprungautowerk.com or through the chat button on the website.
Precision Forged Custom Wheels
At Vorsprung Autowerk, we offer the perfect blend of strength, performance, and style with our custom wheels. Crafted using the finest materials and advanced engineering techniques, our wheels are built to enhance your vehicle's handling and aesthetics.
Key Features
- Monoblock or Multipiece Design
- Custom Spoke Design
- Perfect Fitment Guaranteed
- Multiple Color & Finish Options
- Aircraft-Grade 6061 Aluminum
- Precision Forged for Durability