Vorsprung Titanium Wheel Stud Conversion Kit, Audi & VW M14x1.5 (Set of 20)
Your factory wheel bolts are doing the same job they did the day the car left Ingolstadt or Wolfsburg: holding a wheel on, and adding rotational weight everywhere your suspension has to work hardest. Steel bolts are cheap to manufacture and easy to forget about, right up until you're wrestling a heavy wheel onto a hub while trying to thread four bolts by feel. We built a better way to bolt your wheels on.
The Vorsprung Titanium Wheel Stud Conversion Kit swaps your factory ball-seat bolts for a full stud-and-nut setup machined from aerospace-grade Ti-6Al-4V titanium. It's a complete wheel bolt to stud conversion for Audi and VW M14x1.5 hubs, from the A3, S4 and RS6 to the Q7, R8, Golf R and GTI. Wheels drop straight onto the studs and line up on their own, so changing a wheel is a two-hand job instead of a juggling act.
Lighter, Rust-Proof, Simpler: Titanium Wheel Studs for Audi and VW
A factory steel wheel bolt weighs in around 0.2 lb (100g). Our titanium stud-and-nut combo comes in at less than half that, around 0.1 lb (45g) each. Multiply that across all 20 positions and you're pulling roughly 2.4 lb (1.1kg) of rotational, unsprung weight off your wheels entirely, exactly where a car notices weight the most.
Ti-6Al-4V (Grade 5) is a titanium alloy widely used for motorsport wheel hardware, rated around 950 MPa (138,000 psi) tensile strength. And unlike plated steel, it shrugs off road salt, so your hardware still looks and works like new after a few winters.
- ✅ 65mm overall length, with roughly 35mm of usable thread measured from the brake disc face
- ✅ Less than half the weight of factory OEM wheel bolts
- ✅ Machined from Ti-6Al-4V aerospace-grade titanium alloy, not a lower-grade commercially pure titanium
- ✅ Rolled threads, held to a strict 6g/6H tolerance, for consistent strength and a smooth, reliable install
- ✅ Highly corrosion resistant, which matters if your winters involve road salt
- ✅ Clears up to 10mm of wheel spacer (wheel-dependent), so your spacer setup isn't fighting your hardware
- ✅ 17mm, 12-point head for a secure socket grip every time
Bottom line: faster wheel changes, less rotational mass, and hardware that won't rust, for $279.99 with the nuts and Loctite in the box.
Titanium vs Steel Stud Conversion Kits
Here's how our kit compares with the stud conversion kits Audi and VW owners usually cross-shop.
| Vorsprung Titanium Kit | Typical steel stud kits | Typical name-brand titanium kits | |
|---|---|---|---|
| Material | Ti-6Al-4V (Grade 5) titanium | Chromoly steel, zinc coated | Grade 5 titanium |
| Weight | About 45g per stud and nut | Steel weight | Similar to ours |
| Corrosion | Highly resistant, no coating to wear off | Protected only by the coating | Highly resistant |
| Nuts | 20 included, R13 ball or conical seat | Varies by kit | Varies by kit |
| Loctite | Included | Varies by kit | Varies by kit |
| Price (set of 20) | $279.99 | About $105 to $140 | Around $390 |
Steel kits cost less up front, but you keep the weight and trade it for a coating that wears and rusts. Name-brand titanium kits run around $390. Ours gives you Grade 5 titanium, nuts in your choice of seat and the Loctite for $279.99.
What's Included
- 20x M14x1.5 titanium wheel studs
- 20x M14x1.5 titanium wheel nuts, in your choice of nut style at checkout
- Loctite for the hub-side stud threads
Choose your nut style at checkout:
- ✅ R13 Ball Seat: for OEM and OEM-style Audi and VW wheels
- ✅ Conical Seat: for most aftermarket wheels
Installation
- Remove your wheels.
- If your hubs show any rust, chase the threads with an M14x1.5 tap before installing new hardware. It's a five-minute step that saves a cross-threaded stud later.
- Install the titanium studs into the hub using the included Loctite on the short threads.
- Torque the studs into the hub to 15 Nm using a 4mm hex socket.
- Install spacers, if you're running them, then mount your wheels onto the new studs.
- Torque your wheel nuts to your vehicle's factory specification (see the table below), and re-check the torque after the first 50 to 100 miles.
Torque Specs
| Fastener | Torque |
|---|---|
| Titanium stud into hub (4mm hex, with the included Loctite) | 15 Nm (11 ft-lb) |
| Wheel nuts, most Audi and VW cars (A3 through A8, S and RS models, R8, Golf, Jetta, Passat) | 120 Nm (90 ft-lb) |
| Wheel nuts, Audi Q7 (4L) | 160 Nm (120 ft-lb) |
| Wheel nuts, Q7/SQ7, Q8/SQ8/RS Q8 (4M), Tiguan and other models | Use the wheel bolt torque in your owner's manual |
Wheel nuts use the same torque as your car's factory wheel bolts. The figures above come from Audi owner's manuals; always confirm against the manual for your exact model and year.
Vehicle Fitment
This wheel stud conversion kit is built around the M14x1.5 wheel bolt thread used across most Audi and Volkswagen platforms, so fitment isn't limited to a single chassis or engine. It fits the Audi A3, S3 and RS3, TT, A4, S4 and RS4, A5, S5 and RS5, A6, S6 and RS6, A7, S7 and RS7, A8 and S8, Q5 and SQ5, Q7, SQ7, Q8, SQ8 and RS Q8, and R8, plus the VW Golf, GTI and Golf R, Jetta and GLI, Passat and Tiguan.
| Make | Model | Chassis / Generation | Bolt Thread |
|---|---|---|---|
| Audi | A3 / S3 / RS3 | 8L, 8P, 8V, 8Y | M14x1.5 |
| Audi | TT / TTS / TTRS | 8N, 8J, 8S | M14x1.5 |
| Audi | A4 / S4 / RS4 | B5, B6, B7, B8, B9 | M14x1.5 |
| Audi | A5 / S5 / RS5 | B8, B9 | M14x1.5 |
| Audi | A6 / S6 / RS6 | C4, C5, C6, C7, C8 | M14x1.5 |
| Audi | A7 / S7 / RS7 | C7, C8 | M14x1.5 |
| Audi | A8 / S8 | D2, D3, D4, D5 | M14x1.5 |
| Audi | Q5 / SQ5 | 8R, FY | M14x1.5 |
| Audi | Q7 / SQ7 / Q8 / SQ8 / RSQ8 | 4L, 4M | M14x1.5 |
| Audi | R8 | Mk1, Mk2 | M14x1.5 |
| Volkswagen | Golf / GTI / R | Mk4, Mk5, Mk6, Mk7, Mk8 | M14x1.5 |
| Volkswagen | Jetta / GLI | Mk4, Mk5, Mk6, Mk7, Mk8 | M14x1.5 |
| Volkswagen | Passat | B5, B6, B7, B8, B9 | M14x1.5 |
| Volkswagen | Tiguan | 5N, AD, BW | M14x1.5 |
NOTE: Also fits other makes and models using the M14x1.5 wheel bolt thread, including select Lamborghini models. Choose the R13 ball seat for OEM and OEM-style wheels, or the conical seat for most aftermarket wheels, at checkout. Running spacers thicker than 10mm? Check stud engagement with your wheel before ordering. Don't see your vehicle listed? Email help@vorsprungautowerk.com and we'll confirm fitment.
Titanium Wheel Stud Conversion Kit FAQ
Will this stud conversion kit fit my Audi or VW?
If your car uses M14x1.5 wheel bolts, almost certainly. That covers the models in the fitment table above, from the A3 and Golf to the Q7 and R8. Not sure? Email your VIN and we'll check.
Do I need any special tools to install this kit?
Just a 4mm hex socket to torque the studs into the hub and a 17mm 12-point socket for the nuts. The Loctite for the stud threads is included.
Which nut seat do I need?
Choose R13 Ball Seat for OEM and OEM-style Audi and VW wheels, or Conical Seat for most aftermarket wheels. If you're unsure which seat your wheels use, check with the wheel maker or email us before ordering.
Will these work with wheel spacers?
Yes, up to about 10mm, depending on the wheel. The studs are 65mm overall with roughly 35mm of usable thread from the brake disc face.
Is titanium strong enough for wheel studs?
Ti-6Al-4V (Grade 5) is a titanium alloy widely used for motorsport wheel hardware, rated around 950 MPa (138,000 psi) tensile strength. Install the studs and nuts to the torque specs in the table above, re-check the nuts after the first 50 to 100 miles, and look them over whenever the wheels come off.
How much weight am I actually saving?
Around 2.4 lb (1.1kg) of rotational, unsprung weight across a full set of 20, compared with factory steel bolts.
Can I still run wheel locks after the conversion?
Not locking bolts, since a stud-converted hub takes nuts instead. You'd need M14x1.5 locking nuts with the same seat type as your wheels.
Why Buy From Us?
Grade 5 titanium studs, nuts in the seat style your wheels need and the Loctite, all in one box for well under what the name-brand titanium kits charge. They ship from us, and a real person will confirm fitment before you order.
-
✅
Enthusiast Designed & Tested: Developed by people who actually drive and modify these cars.
-
✅
Tested on Our Own Cars: If we wouldn't run it ourselves, we don't sell it.
-
✅
Continuous R&D: We continually develop and improve our products instead of relying on generic catalog parts.
-
✅
Supporting Audi Platform Development: Your purchase helps fund continued development of new parts for these chassis.
-
✅
Real Enthusiast Support: Get help from people who understand the platform, not ticket bots.
-
✅
Small Team, Big Passion: Every order directly supports continued product development and innovation.
-
✅
Performance Without the Marketing Fluff: Purpose-built parts designed to perform.
Complete Your Build
Frequently paired with this kit:
- Vorsprung VF-08 Forged Wheels: putting new wheels on anyway? Pair the swap with a set of our own forged wheels.
- Vorsprung VA-002 Forged Wheels: another one of our forged options, built to pair with this hardware.
Not ready for a full stud conversion? The Audi Titanium Ball Seat Wheel Lug Kit gives you the same titanium weight savings in a direct OEM-style bolt, and it works with our Titanium Wheel Lock Kit. Browse all wheel spacers and lug hardware.
Shop More Parts for Your Audi
Browse every Vorsprung part for your chassis: Audi S4 & S5 B8/B8.5 parts · Audi A6 & A7 C7/C7.5 parts · Audi Q5 & SQ5 B8/B8.5 parts · Audi Q7 4L/4M parts.
Drive the difference. Drive Vorsprung.
Vorsprung Titanium Wheel Stud Conversion Kit, Audi & VW M14x1.5 (Set of 20)
Frequently Asked Questions (FAQ)
What types of products do you offer?
We offer a wide range of high-performance automotive parts including engine components, suspension upgrades, fueling solutions, and custom wheels, all designed to enhance your vehicle’s performance.
Are your products compatible with all car models?
Our products are specifically designed for high-performance vehicles, including luxury and sports cars like Audi. For compatibility details, please refer to the product description or contact our support team for assistance.
How can I ensure the correct fit for my car?
We offer guided fitment assistance for all our products. If you're unsure, feel free to reach out to our customer support team, and we'll help you find the perfect fit for your vehicle.
Where do you ship?
We currently ship to the United States and Canada, with free US shipping on orders over $425. Outside North America? Email orders@vorsprungautowerk.com with your part and address and we'll quote shipping for you.
How do I install the products?
Most of our products come with easy-to-follow installation guides. Additionally, if you need professional installation, we can recommend certified mechanics or shops for assistance.
What is your return policy?
We offer a 14-day return policy for unused products. To be eligible for a return, items must be in their original packaging and in resellable condition. Please refer to our return policy page for detailed instructions.
How can I contact customer support?
You can contact our customer support team via email at orders@vorsprungautowerk.com or through the chat button on the website.
Precision Forged Custom Wheels
At Vorsprung Autowerk, we offer the perfect blend of strength, performance, and style with our custom wheels. Crafted using the finest materials and advanced engineering techniques, our wheels are built to enhance your vehicle's handling and aesthetics.
Key Features
- Monoblock or Multipiece Design
- Custom Spoke Design
- Perfect Fitment Guaranteed
- Multiple Color & Finish Options
- Aircraft-Grade 6061 Aluminum
- Precision Forged for Durability