Vorsprung billet thermostat housing for Audi 3.0T EA837 Gen 1 in black anodized finish with its hardware kit, top view
Gasket side of the Vorsprung billet thermostat housing for Audi 3.0T EA837 Gen 1, with the thermostat seated
Vorsprung Audi 3.0T EA837 Gen 1 billet thermostat housing kit with OE thermostat, bolts and hardware
Vorsprung billet thermostat housing for Audi 3.0T EA837 Gen 1 in black anodized finish with its hardware kit, top view
Gasket side of the Vorsprung billet thermostat housing for Audi 3.0T EA837 Gen 1, with the thermostat seated
Vorsprung Audi 3.0T EA837 Gen 1 billet thermostat housing kit with OE thermostat, bolts and hardware

Audi 3.0T Billet Thermostat Housing, EA837 Gen 1 Non-Evo

Regular price $199.99
Sale price $199.99 Regular price
Unit price
In stock, ships from Vorsprung
US Shipping $4.99Flat rate on this part, free over $425
14-Day ReturnsHassle-free, see return policy
Pay Over TimeShop Pay, Affirm or Afterpay at checkout
Tested On Our CarsReal 3.0T support from people who wrench
  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Vorsprung Autowerk Billet Aluminum Thermostat Upgrade (3.0T)

The Vorsprung Autowerk billet thermostat housing is a 6061-T6 aluminum replacement for the factory plastic thermostat housing on the Gen 1 (Non-Evo) Audi 3.0T EA837 supercharged V6, fitting the B8/B8.5 S4 and S5, C6 and C7 A6, A7, A8, B8.5 Q5 and SQ5, Q7 and VW Touareg Hybrid.

Plastic has no place in your cooling system.

From the factory, the Audi 3.0T is a masterpiece of engineering except for one glaring flaw. Audi equipped this high-heat, high-performance engine with a cheap plastic thermostat housing. It’s not a matter of if it fails, but when.

After thousands of heat cycles and constant exposure to corrosive antifreeze, that factory plastic turns brittle. It cracks. It warps. And eventually, it dumps your coolant, leading to overheating and potential catastrophic engine failure.

The Permanent Solution: We don't believe in replacing a failed plastic part with another plastic part. The Vorsprung Autowerk Billet Thermostat is the bulletproof fix your supercharged engine deserves. Precision-machined from 6061-T6 aluminum, this unit is engineered to outlast the car itself. It eliminates the weak link in your cooling loop, giving you the reliability you need for daily driving and the durability you need for the track.

Engineered, Not Just Machined. We didn’t just make it metal; we made it smarter.

Ready to Drop In: Stop worrying about your temp gauge. This unit comes pre-assembled with an OEM-equivalent thermostat.

Technical Specifications:

  • Material: 6061-T6 Billet Aluminum (Zero warping, zero cracking).

  • Finish: Anodized for superior corrosion resistance and engine bay aesthetics.

Kit Includes:

  • Billet Housing
  • Motorad (OE) Thermostat
  • OE Gaskets
  • All Hardware
  • New Bolts

Billet Only Housing Includes:

  • All of the above except the thermostat

Want the full story? Read our Audi 3.0T billet thermostat housing upgrade guide for failure symptoms, OEM+ design details, the recessed screw upgrade and install tips.


Vehicle Fitment

This is the Gen 1 (Non-Evo) housing, replacing OEM part numbers 06E121111AL, 06E121111AD, 06E121111S, and 06E121111T across the vehicles below.

Make Model Years Engine
Audi B8/B8.5 S4 2010-2016 3.0T V6
Audi B8/B8.5 S5 2010-2017 3.0T V6
Audi C6 A6 2009-2011 3.0T V6
Audi C7 A6 (FWD & Quattro) 2012-2015 3.0T V6
Audi A7 2011-2015 3.0T V6
Audi A8 2010-2015 3.0T V6
Audi B8.5 Q5 2013-2017 3.0T V6
Audi B8.5 SQ5 2014-2017 3.0T V6
Audi Q7 2011-2015 3.0T V6
VW Touareg Hybrid 2009-2016 3.0T V6

S5 / A5 NOTE: 2010-2012 fitment is the S5 Cabriolet only (the 2008-2012 S5 coupe has the 4.2 V8). The A5 was never sold with the supercharged 3.0T in North America; the European-market B8.5 A5 3.0 TFSI (2012-2016) uses the same EA837 engine, so confirm your engine code before ordering.

NOTE: This is the earlier Gen 1 (Non-Evo) housing. If your Audi uses the later Gen 2 (CREC) 3.0T, see our separate Gen 2 CREC Thermostat Housing listing. Did we miss something? Email us at help@vorsprungautowerk.com.

Regulatory Notice: Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.


Thermostat Housing FAQ

Why does the factory plastic housing fail?
After thousands of heat cycles and constant exposure to corrosive antifreeze, the factory plastic turns brittle, cracks, and warps - eventually dumping coolant and risking overheating or catastrophic engine failure.

Should I get the full kit or the billet-only housing?
The full kit includes a Motorad (OE) thermostat, OE gaskets, all hardware, and new bolts. The billet-only housing includes everything except the thermostat.

Is this a direct bolt-on?
Yes, it comes pre-assembled and installs in place of the factory plastic housing with no modification required.

Will this fit my Audi?
This housing fits the Gen 1 (Non-Evo) 3.0T supercharged platform - check the Vehicle Fitment table above. If your Audi uses the later Gen 2 (CREC) 3.0T, you'll need a different housing.

Is this legal in California?
Not for sale or use in the state of California on any pollution-controlled vehicle, per the California Air Resources Board.


Why Buy From Us?

  • ✅
    Enthusiast Designed & Tested: Developed by people who actually drive and modify these cars.
  • ✅
    Tested on Our Own Cars: If we wouldn't run it ourselves, we don't sell it.
  • ✅
    Continuous R&D: We continually develop and improve our products instead of relying on generic catalog parts.
  • ✅
    Supporting Audi Platform Development: Your purchase helps fund continued development of new parts for these chassis.
  • ✅
    Real Enthusiast Support: Get help from people who understand the platform, not ticket bots.
  • ✅
    Small Team, Big Passion: Every order directly supports continued product development and innovation.
  • ✅
    Performance Without the Marketing Fluff: Purpose-built parts designed to perform.

Drive the difference. Drive Vorsprung.

Vorsprung billet thermostat housing for Audi 3.0T EA837 Gen 1 in black anodized finish with its hardware kit, top view

Audi 3.0T Billet Thermostat Housing, EA837 Gen 1 Non-Evo

  • 5 stars: 2 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
M
Macanovic Nikola
Looks great well

Looks great well build

J
Jesse Smith
The picture really doesn’t do the thermostat housing justice

The picture really doesn’t do the thermostat housing justice, the housing is well crafted and solid , i was highly impressed with it

Fast delivery icon

Fast Delivery

2-5 business days

Blue shield with white checkmark symbolizing quality assurance

Genuine Parts

100% Authentic

Blue gear icon with checkmark, symbolizing approved Audi performance parts for enhanced power and handling

Quality guaranteed

We ensure premium quality

Blue speech bubble with three dots, symbolizing communication or support for Audi performance parts.

Enthusiast Support

Chat or email with people who wrench on these cars

Frequently Asked Questions (FAQ)

What types of products do you offer?

Are your products compatible with all car models?

How can I ensure the correct fit for my car?

Where do you ship?

How do I install the products?

What is your return policy?

How can I contact customer support?

Free shipping in the United States for orders over $425
Easy returns 14 Day Hassle-Free Returns
Premium Quality

Precision Forged Custom Wheels

At Vorsprung Autowerk, we offer the perfect blend of strength, performance, and style with our custom wheels. Crafted using the finest materials and advanced engineering techniques, our wheels are built to enhance your vehicle's handling and aesthetics.

Key Features

  • Monoblock or Multipiece Design
  • Custom Spoke Design
  • Perfect Fitment Guaranteed
  • Multiple Color & Finish Options
  • Aircraft-Grade 6061 Aluminum
  • Precision Forged for Durability
High-performance multi-piece alloy wheel with floating center and lug bolts, designed for Audi tuning and enhanced handling.
Custom Built