Vorsprung TruShift V2 Transmission Mount, Audi C7/C7.5 A6, S6, RS6, A7, S7, RS7 and 4M/4M.5 Q7, Q8
Audi A6, A7 and C7 Transmission Mount Upgrade: TruShift V2
The Vorsprung TruShift V2 is a direct-fit transmission mount upgrade for the 2012-2018 Audi C7/C7.5 A6, S6, RS6, A7, S7 and RS7, plus the 2017-2024 Q7 (4M and 4M.5) and the 2020-2024 Q8. It replaces the soft factory transmission mount with firmer 70A durometer rubber, so the gearbox stops rocking under acceleration and hard shifts, and your inputs go to the pavement instead of into the chassis. It is finished in a matte Vorsprung Blue coating and bolts in with no modifications.
Clunk from Park into Drive, a bang on quick shifts, a rubbery delay on throttle tip-in? A tired factory mount is the usual suspect, and the dealer will sell you the same soft rubber again. TruShift fixes the cause and keeps the car daily drivable.
- ✅ 70A durometer rubber, firmer than stock for tighter shifts and less drivetrain slop
- ✅ Daily-drivable vibration, without the idle buzz of a poly-bushed billet mount
- ✅ Direct bolt-on replacement for the factory transmission mount, no cutting or adapters
- ✅ Matte Vorsprung Blue finish, a durable, heat-resistant coating
- ✅ Lifetime warranty for the original owner when bought from us
- ✅ $74.99, in stock and shipping now
Full billet transmission mounts with polyurethane bushings for this platform typically run well over $300. TruShift V2 is $74.99.
Why the Factory C7 and Q7 Transmission Mount Fails
Audi tuned the factory mount for comfort, so the rubber is soft. Add age, heat from the exhaust and gearbox, a tune or just a heavy right foot, and the rubber takes a set, cracks or tears. Now the transmission has room to move every time torque changes direction. You feel it as a clunk into gear, a thump on upshifts and downshifts, a vague delay before the car moves, and extra vibration in gear at idle.
Key Features
70A Durometer Rubber
Increased stiffness over the factory mount for better shift precision and less drivetrain slop, while the rubber still absorbs the vibration that a polyurethane bushing passes straight into the cabin.
Optimized Geometry
Engineered for improved power transfer and stability under load, so the transmission stays put when you launch, shift hard or load the car up in a corner.
Direct Fitment
Simple bolt-on installation in place of the factory mount, with no modifications required. View the installation torque specs.
Vorsprung Blue Finish
A durable, heat-resistant matte coating that looks right in the engine bay and holds up to heat cycles under the car.
TruShift V2 vs Billet Mounts with Poly Bushings vs Factory Mount
| Vorsprung TruShift V2 | Billet mount, poly bushing | Factory mount | |
|---|---|---|---|
| Isolator | 70A durometer rubber | Polyurethane, often 65A to 80A | Soft factory rubber |
| Drivetrain slop | Reduced | Reduced further | Returns as the rubber ages |
| Cabin vibration | Slightly more than stock, daily drivable | Noticeably more, especially at idle | Lowest |
| Install | Direct bolt-on | Usually bolt-on | Bolt-on |
| Price | $74.99 | Typically well over $300 | Audi Tax applies |
| Warranty | Lifetime, original owner | Varies by brand | Parts warranty only |
Bottom line: if you are building a dedicated track car and maximum rigidity is worth extra vibration and cost, a poly-bushed billet mount is the more extreme option. If you want a noticeable, daily-drivable upgrade over the factory mount at the best value on the C7 and 4M platform, TruShift V2 is the smarter buy.
Vehicle Fitment
The TruShift V2 is a direct-fit replacement for the factory transmission mount on the 2012-2018 Audi A6 and A7, the 2013-2018 S6, S7 and RS6 and the 2014-2018 RS7 (C7/C7.5), plus the 2017-2019 Q7 (4M), the 2020-2024 Q7 (4M.5) and the 2020-2024 Q8. On the C7 it fits the 3.0T, 3.0 TDI and 4.0T V8 engines.
| Make | Model | Chassis | Years |
|---|---|---|---|
| Audi | A6 | C7 / C7.5 | 2012-2018 |
| Audi | S6 | C7 / C7.5 | 2013-2018 |
| Audi | RS6 | C7 / C7.5 | 2013-2018 |
| Audi | A7 | C7 / C7.5 | 2012-2018 |
| Audi | S7 | C7 / C7.5 | 2013-2018 |
| Audi | RS7 | C7 / C7.5 | 2014-2018 |
| Audi | Q7 | 4M | 2017-2019 |
| Audi | Q7 | 4M.5 | 2020-2024 |
| Audi | Q8 | 4M.5 | 2020-2024 |
ENGINE NOTE: C7 fitment covers the 3.0T and 3.0 TDI A6 and A7 and the 4.0T V8 S6, S7, RS6 and RS7. The C7 RS6 Avant was sold outside North America.
NOTE: Confirm your exact model year and chassis code before ordering, especially near a generation changeover. Own a car not listed here? Email your VIN to help@vorsprungautowerk.com and we will confirm fitment before you order.
Audi C7 Transmission Mount FAQ
What are the symptoms of a bad C7 or Q7 transmission mount?
A clunk shifting into Drive or Reverse, a bang on quick shifts, a rubbery delay on throttle tip-in, extra vibration in gear at idle, and cracked or sagging mount rubber when you look from underneath.
Will this mount increase cabin vibration?
You will feel some added vibration compared to a worn factory mount, because the 70A rubber is firmer. It is tuned to stay comfortable for daily driving, nowhere near the buzz of a full billet mount with a poly bushing.
How does this compare to a billet aluminum mount with a poly bushing?
A poly-bushed billet mount swaps the factory rubber for a much harder polyurethane element. That tightens things up further but transmits noticeably more vibration into the cabin, especially at idle, and it typically costs well over $300. TruShift V2 uses 70A rubber for a noticeable, daily-drivable upgrade at $74.99.
Does it fit 8-speed Tiptronic (ZF 8HP) and 7-speed S tronic cars?
It fits the models in the fitment table. On the C7, the A6 and A7 (3.0T and 3.0 TDI), RS6 and RS7 use the ZF 8-speed Tiptronic, while the S6 and S7 use the 7-speed S tronic. If your car has a different gearbox, such as the Multitronic CVT on some front-drive A6 models, email your VIN before ordering.
Does it fit the 4.0T V8 and 3.0 TDI C7?
Yes. It fits the C7 with the 3.0T, 3.0 TDI and 4.0T V8: the A6 and A7 (3.0T and 3.0 TDI) and the S6, S7, RS6 and RS7 (4.0T).
Should I get the full mount or the billet insert?
If your factory mount is still healthy, our billet transmission mount insert for C7 and 4M ($39.99) fills the void in the factory rubber. If the factory mount is cracked, sagging or torn, replace the whole mount with TruShift V2.
Is installation a direct bolt-on?
Yes. Support the transmission, swap the mount and torque to spec. See the linked torque specifications above.
Is this mount covered by a warranty?
Yes, it includes a lifetime warranty for the original owner when purchased directly through our website. See the warranty details below.
Lifetime Warranty
All Vorsprung mounts are covered by a lifetime warranty for the original owner when purchased directly through our website. This warranty protects against defects in materials and workmanship for the life of the product. If a mount fails under normal use, we will repair or replace it at no charge. Proof of purchase is required, and the original product must be returned for inspection. Standard shipping rates apply for all replacement items.
Complete Your Build
- C7 billet subframe inserts: take the slop out of the rear subframe bushings.
- Billet rear differential carrier inserts: firm up the diff carrier behind the gearbox.
- Audi transmission mount upgrade guide: symptoms, insert vs full mount and fitment by platform.
Why Buy From Us?
A firmer 70A rubber transmission mount that bolts in like the factory part, for a fraction of what poly-bushed billet mounts cost, with a lifetime warranty for the original owner. It ships from US stock, and a real person will confirm fitment before you order.
-
✅Enthusiast Designed & Tested: Developed by people who actually drive and modify these cars.
-
✅Tested on Our Own Cars: If we wouldn't run it ourselves, we don't sell it.
-
✅Continuous R&D: We continually develop and improve our products instead of relying on generic catalog parts.
-
✅Supporting Audi Platform Development: Your purchase helps fund continued development of new parts for these chassis.
-
✅Real Enthusiast Support: Get help from people who understand the platform, not ticket bots.
-
✅Small Team, Big Passion: Every order directly supports continued product development and innovation.
-
✅Performance Without the Marketing Fluff: Purpose-built parts designed to perform.
Shop More Parts for Your Audi
Browse every Vorsprung part for your chassis: Audi A6 & A7 C7/C7.5 parts · Audi Q7 4L/4M parts · Audi Q7 & Q8 4M.5 parts. Or see all engine and transmission mounts.
Drive the difference. Drive Vorsprung.
Vorsprung TruShift V2 Transmission Mount, Audi C7/C7.5 A6, S6, RS6, A7, S7, RS7 and 4M/4M.5 Q7, Q8
Frequently Asked Questions (FAQ)
What types of products do you offer?
We offer a wide range of high-performance automotive parts including engine components, suspension upgrades, fueling solutions, and custom wheels, all designed to enhance your vehicle’s performance.
Are your products compatible with all car models?
Our products are specifically designed for high-performance vehicles, including luxury and sports cars like Audi. For compatibility details, please refer to the product description or contact our support team for assistance.
How can I ensure the correct fit for my car?
We offer guided fitment assistance for all our products. If you're unsure, feel free to reach out to our customer support team, and we'll help you find the perfect fit for your vehicle.
Where do you ship?
We currently ship to the United States and Canada, with free US shipping on orders over $425. Outside North America? Email orders@vorsprungautowerk.com with your part and address and we'll quote shipping for you.
How do I install the products?
Most of our products come with easy-to-follow installation guides. Additionally, if you need professional installation, we can recommend certified mechanics or shops for assistance.
What is your return policy?
We offer a 14-day return policy for unused products. To be eligible for a return, items must be in their original packaging and in resellable condition. Please refer to our return policy page for detailed instructions.
How can I contact customer support?
You can contact our customer support team via email at orders@vorsprungautowerk.com or through the chat button on the website.
Precision Forged Custom Wheels
At Vorsprung Autowerk, we offer the perfect blend of strength, performance, and style with our custom wheels. Crafted using the finest materials and advanced engineering techniques, our wheels are built to enhance your vehicle's handling and aesthetics.
Key Features
- Monoblock or Multipiece Design
- Custom Spoke Design
- Perfect Fitment Guaranteed
- Multiple Color & Finish Options
- Aircraft-Grade 6061 Aluminum
- Precision Forged for Durability