Vorsprung Vent Tube | Audi 3.0T Supercharger Replacement 06E103213

The supercharger and transaxle on your 3.0T V6 need somewhere to vent, and the factory rubber tube that handles it isn't built to last forever. Heat, oil vapor, and years of engine bay abuse eventually turn that tube brittle, and a cracked vent line means leaks, boost pressure going where it shouldn't, and a supercharger housing that's no longer sealed the way it needs to be.

The Vorsprung Autowerk Vent Tube is a precision-manufactured replacement for the factory unit (cross-references to Audi part 06E103213), engineered for the 3.0T supercharged V6 platform. It restores the proper seal between the supercharger, transaxle, and vent circuit, so pressure and vapor go exactly where they're supposed to instead of finding the path of least resistance through a crack in your old tube.

Why That Little Vent Tube Matters More Than It Looks

It's a small, cheap-looking part doing a job that isn't small at all: keeping your supercharger and transaxle venting under control. Once the rubber hardens and cracks, you get vacuum leaks, inconsistent boost behavior, and vapor escaping where it should be contained. It's an easy failure point to overlook until it isn't.

Key Features & Benefits

• ✅ Precision Fitment — Manufactured to factory dimensions for a proper seal at every connection point. Drops in where the original tube lived, no adapters or workarounds.
• ✅ Built to Take the Heat — Heat and oil-resistant rubber compound designed to outlast the factory tube's tendency to harden and crack under constant engine bay temperatures.
• ✅ Restores Proper Venting — Seals the supercharger and transaxle vent circuit correctly, keeping boost and vapor pressure where they belong instead of escaping through a failed line.
• ✅ Cheap Insurance — A low-cost preventive swap that heads off vacuum leaks and pressure issues before they turn into a bigger diagnostic chase.

Bottom line: it's an easy part to ignore until your boost gauge starts telling you a story you don't like. Replace it while it's still a $20 fix.

Note: Inspect surrounding clamps and fittings at the time of replacement, since a hardened original tube is often a sign the rest of the vent circuit is due for a look too.

Fitment

This vent tube fits the 3.0T supercharged V6 platform across the following applications.

Direct replacement for factory part 06E103213. Confirm your chassis code before ordering, since Audi revised this tube across several supercharged platforms.