Audi Crankcase Breather Hose - Genuine Audi 06E103207AR
Sometimes the Genuine Part Is the Right Call
Genuine Audi Engine Crankcase Breather Hose - PCV Valve to Intake
Not every job needs a cross-reference part. If your inspector wants factory paperwork, you're chasing a warranty claim, or you just want the exact piece Audi installed, this is it: the genuine OEM crankcase breather hose, part 06E103207AR, not a reproduction.
The plastic in these hoses breaks down over time from heat, pressure, and oil vapor exposure. When it finally cracks, you get a vacuum leak, a rough idle, and a check engine light at a bad time. Replacing it with the genuine part means you're not guessing about fit or material quality, you're putting back exactly what came off.
Engine Crankcase Breather Hose
An engine crankcase breather hose is a primary component of an engine's positive crankcase ventilation system, funneling pressurized air from the engine crankcase to the air/oil separator, also known as the PCV valve. The PCV valve, or air/oil separator, is designed to capture and remove oil vapors from the pressurized crankcase air, allowing them to drain back to the engine, while the pressurized air is fed to the intake side of the engine and utilized as part of normal combustion.
An engine develops positive crankcase pressure as a byproduct of the overall combustion process. Because of the combination of pressure, heat, and the air/oil-vapor mixture traveling to the PCV valve, the engine crankcase breather hose is a common failure item within the PCV system and is crucial to your car's engine's performance and emissions compliance.
Engine Crankcase Breather Hose Failure Symptoms
- Cracks breaks, leaks: Over time, your engine crankcase breather hose can be easily damaged because of constant exposure to oil vapors, heat, and pressure from the engine. The engine oil can slowly break down the plastic or rubber materials, eventually causing an air leak. This can happen naturally, or because it is damaged from external contact.
- Broken connectors: Plastic can become brittle over time, especially when exposed to heat and oil, and it's easy to break one of the securing clips or connectors for a PCV hose, either during removal or during other services.
- Broken or damaged hose: Soft rubber or brittle plastic, depending on the material of the hose, can result in an obvious hole or split in an engine crankcase breather hose, usually accompanied by one of the other faults listed below.
- Check Engine Light: Excessive unmetered air from a failed engine crankcase breather hose can result in a CEL for an air intake leak fault or other airflow-related diagnostic trouble codes.
- Misfire: A severe air intake leak can cause rough running and an engine misfire, a common side effect of a bad engine crankcase breather hose or PCV Valve
- Oil residue on or around the hose or adjacent components: As engine crankcase vapors escape from a faulty engine crankcase breather hose, the hose, engine block, and adjacent components are likely to become visibly soiled with oil residue and moisture. In the most severe cases, you will smell burning or burnt oil, and you may need to degrease the area to determine the exact cause of the oil residue.
Bottom line: if you want the exact part Audi built the car with, not a cross-reference, this is it.
Vehicle Fitment
This genuine breather hose fits the 3.0L V6 supercharged platform across the Audi A6/A7 (C7), A8 (D4), S4/S5 (B8.5), and Q7 (4M).
| Make | Model | Years | Chassis | Engine |
|---|---|---|---|---|
| Audi | A6 | 2016-2018 | C7 | 3.0L V6 Supercharged |
| Audi | A7 | 2016-2018 | C7 | 3.0L V6 Supercharged |
| Audi | A8 | 2015-2018 | D4 | 3.0L V6 Supercharged |
| Audi | S4 | 2015-2016 | B8.5 | 3.0L V6 Supercharged |
| Audi | S5 | 2015-2017 | B8.5 | 3.0L V6 Supercharged |
| Audi | Q7 | 2017-2019 | 4M | 3.0L V6 Supercharged |
NOTE: Genuine OEM part 06E103207AR, a supersession of 06E103207AE and 06E103207AJ, and part of the same interchange family as 06E103207AC, 06E103207AH, and 06E103207AP. Confirm your chassis code and production date before ordering.
Engine Crankcase Breather Hose FAQ
Is this a genuine Audi part or an aftermarket reproduction?
This is a genuine Audi OEM part, part number 06E103207AR, not an aftermarket reproduction.
How do I know if my breather hose needs replacing?
Common signs are a check engine light for an air intake leak, rough idle or misfire, and visible oil residue around the hose or adjacent components.
Is this a direct bolt-on replacement?
Yes, it's manufactured to factory dimensions and drops in where the original hose lived, cross-referencing Audi part 06E103207AR and its supersession chain (06E103207AE, 06E103207AJ).
What should I inspect while replacing this hose?
Check the surrounding clamps and connectors at the same time, since brittle plastic in one spot often means nearby fittings are due for a look too.
Why Buy From Us?
-
✅Enthusiast Designed & Tested: Developed by people who actually drive and modify these cars.
-
✅Tested on Our Own Cars: If we wouldn't run it ourselves, we don't sell it.
-
✅Continuous R&D: We continually develop and improve our products instead of relying on generic catalog parts.
-
✅Supporting Audi Platform Development: Your purchase helps fund continued development of new parts for these chassis.
-
✅Real Enthusiast Support: Get help from people who understand the platform, not ticket bots.
-
✅Small Team, Big Passion: Every order directly supports continued product development and innovation.
-
✅Performance Without the Marketing Fluff: Purpose-built parts designed to perform.
Complete Your Build
Already in the valley? Pair this genuine hose with:
- Vorsprung Crankcase Breather Hose, 06E103207AR cross-reference — a lower-cost cross-reference alternative to this genuine part, same fitment.
- OE Ultimate Under Supercharger Kit (B8.5 & C7) — if you're already replacing the PCV valve or thermostat, do this hose in the same service window.
Drive the difference. Drive Vorsprung.
Audi Crankcase Breather Hose - Genuine Audi 06E103207AR
Frequently Asked Questions (FAQ)
What types of products do you offer?
We offer a wide range of high-performance automotive parts including engine components, suspension upgrades, fueling solutions, and custom wheels, all designed to enhance your vehicle’s performance.
Are your products compatible with all car models?
Our products are specifically designed for high-performance vehicles, including luxury and sports cars like Audi. For compatibility details, please refer to the product description or contact our support team for assistance.
How can I ensure the correct fit for my car?
We offer guided fitment assistance for all our products. If you're unsure, feel free to reach out to our customer support team, and we'll help you find the perfect fit for your vehicle.
Where do you ship?
We currently ship to the United States and Canada, with free US shipping on orders over $425. Outside North America? Email orders@vorsprungautowerk.com with your part and address and we'll quote shipping for you.
How do I install the products?
Most of our products come with easy-to-follow installation guides. Additionally, if you need professional installation, we can recommend certified mechanics or shops for assistance.
What is your return policy?
We offer a 14-day return policy for unused products. To be eligible for a return, items must be in their original packaging and in resellable condition. Please refer to our return policy page for detailed instructions.
How can I contact customer support?
You can contact our customer support team via email at orders@vorsprungautowerk.com or through the chat button on the website.
Precision Forged Custom Wheels
At Vorsprung Autowerk, we offer the perfect blend of strength, performance, and style with our custom wheels. Crafted using the finest materials and advanced engineering techniques, our wheels are built to enhance your vehicle's handling and aesthetics.
Key Features
- Monoblock or Multipiece Design
- Custom Spoke Design
- Perfect Fitment Guaranteed
- Multiple Color & Finish Options
- Aircraft-Grade 6061 Aluminum
- Precision Forged for Durability