Vorsprung SAI Delete Plate Set, Audi 3.0T Supercharged EA837 (S4, S5, A6, A7, A8, Q7)
Vorsprung Autowerk SAI Delete Plate Set
One Less System to Babysit
The secondary air injection system on your 3.0T exists to help Audi pass an emissions test on day one, and that's about where its usefulness ends. The plastic pipe tucked behind the timing cover turns brittle with age and loves to snap the moment a wrench gets anywhere near it, which is a special kind of annoying when it turns a routine timing cover job into an all-day affair. The Vorsprung Autowerk SAI Delete Plate Set gives that whole system its walking papers.
Pull the pump, the valves, and the hoses, bolt on a set of CNC-machined 6061-T6 billet plates, and get your afternoon back.
- ✅ CNC-machined 6061-T6 billet plates, made specifically for the Audi EA837 3.0T supercharged V6
- ✅ Viton o-rings and new stainless steel cap screws in every kit, plus vacuum caps for the SAI solenoid ports
- ✅ Pre-CREC and CREC versions to match your engine generation, selected at checkout
- ✅ In stock and shipping from us at $34.99
Bottom line: delete the SAI system once, seal it properly, and get your timing cover and PCV access back for $34.99.
Built for Wrenching, Not Just Deleting
This isn't a generic aluminum blank you have to modify to make fit. Each plate is machined specifically for the EA837 3.0T, so it drops in exactly where the factory SAI hardware used to live. With the pump, valves, and that fragile pipe gone, you also get real access to the PCV area, timing covers, oxygen sensor connectors, and the oil filter housing, the parts of this engine that are miserable to reach with the SAI system still bolted in place.
6061-T6 CNC-Machined Plates, Viton O-Rings & New Hardware
Each plate is CNC-machined from 6061-T6 billet aluminum and seals against the head with an included Viton o-ring, which holds up to engine-bay heat and oil exposure better than a generic rubber ring. Every kit ships with new stainless steel cap screws, so you're not reusing tired factory bolts (we recommend 9 Nm with blue threadlocker). Vacuum caps are included for the SAI solenoid ports, so there are no dangling vacuum lines left to cap off with a spare bolt and a prayer.
Built for Both Engine Generations
The EA837 changed its SAI plumbing partway through production, so this kit comes in two versions, Pre-CREC and CREC, to match your specific engine. Pre-CREC covers the Gen 1 engine in the B8/B8.5 S4 and S5, the C6 and C7 A6, the C7 A7 and the early D4 A8. CREC covers the Gen 2 engine in the C7.5 A6 and A7, the later D4 A8 and the 4M Q7. Pick the version that matches your engine code and it bolts right in.
Key Features & Specifications
-
Material: CNC-Machined 6061-T6 Billet Aluminum
-
Hardware: New Stainless Steel Cap Screws, Included
-
Sealing: Viton O-Rings Included
-
Also Included: Vacuum Caps for SAI Solenoid Ports
-
Recommended Torque: 9 Nm with Blue Threadlocker
-
Engine Versions: Pre-CREC and CREC, select at checkout
-
Fitment: Direct Bolt-On, Engine-Specific Design
Vorsprung Autowerk Guarantee: Once these plates are on, the only thing you'll miss about your SAI system is how much room it used to take up in the engine bay. We don't miss it either.
Note: Intended for off-road and track use only. Deleting the SAI system requires a proper tune to avoid a check engine light, and emissions laws vary by location, so know your local rules before you delete.
Vehicle Fitment
This Audi 3.0T SAI delete plate set fits the supercharged EA837 V6. Choose Pre-CREC for the 2010-2016 S4 (B8/B8.5), 2010-2017 S5 (B8/B8.5), 2009-2011 A6 3.0T (C6), 2012-2015 A6 and A7 (C7) and 2013-2014 A8 3.0T (D4). Choose CREC for the 2016-2018 A6 and A7 (C7.5), 2015-2018 A8 3.0T (D4) and 2017-2019 Q7 3.0T (4M).
| Make | Model | Years | Chassis | Version to Select |
|---|---|---|---|---|
| Audi | S4 | 2010-2016 | B8 / B8.5 | Pre-CREC |
| Audi | S5 | 2010-2017 | B8 / B8.5 | Pre-CREC |
| Audi | A6 3.0T | 2009-2011 | C6 | Pre-CREC |
| Audi | A6 3.0T | 2012-2015 | C7 | Pre-CREC |
| Audi | A7 3.0T | 2012-2015 | C7 | Pre-CREC |
| Audi | A8 3.0T | 2013-2014 | D4 | Pre-CREC |
| Audi | A6 3.0T | 2016-2018 | C7.5 | CREC |
| Audi | A7 3.0T | 2016-2018 | C7.5 | CREC |
| Audi | A8 3.0T | 2015-2018 | D4 | CREC |
| Audi | Q7 3.0T | 2017-2019 | 4M | CREC |
NOTE: Cars built near a model-year changeover are the ones to double check. Email help@vorsprungautowerk.com with your VIN or engine code and we will confirm Pre-CREC or CREC before you order. Turbocharged EA839 cars (B9 S4/S5, C8 A6/A7) are not supported.
S5 / A5 NOTE: 2010-2012 fitment is the S5 Cabriolet only (the 2008-2012 S5 coupe has the 4.2 V8). The A5 was never sold with the supercharged 3.0T in North America; the European-market B8.5 A5 3.0 TFSI (2012-2016) uses the same EA837 engine, so confirm your engine code before ordering.
Delete the SAI system, get a proper tune to keep the check engine light off, and enjoy an engine bay that's actually pleasant to work on.
SAI Delete Plate Set FAQ
Do I need a tune after deleting the SAI system?
Yes. Deleting the SAI system requires a proper tune to prevent a check engine light. This kit is intended for off-road and track use, and emissions laws vary by location.
How do I know if I need the Pre-CREC or CREC version?
It depends on your specific engine code and SAI plumbing generation. Select the version that matches your engine code at checkout. If you're not sure, reach out and we'll help you confirm.
What's included?
CNC-machined 6061-T6 billet aluminum plates, Viton o-rings, new stainless steel cap screws, and vacuum caps for the SAI solenoid ports.
Does removing the SAI system cause any driveability issues?
No, once properly tuned. The SAI system only runs briefly on cold start to help meet emissions targets; deleting it and tuning around it does not affect normal driving.
What can I remove with the SAI delete plates installed?
The secondary air pump, the combi valves, the hoses and the brittle plastic SAI pipe behind the timing cover. The plates seal the ports on the heads where the SAI hardware used to bolt on.
Will this fit my Q5, SQ5 or 4L Q7?
Those models are not on our confirmed fitment list. Email your VIN to help@vorsprungautowerk.com and we will tell you whether either version fits before you order.
Are these in stock?
Yes. Both the Pre-CREC and CREC versions are in stock and ship from us.
Complete Your Build
With the SAI hardware gone, the parts it used to hide are finally easy to reach:
- Oil Filter Housing Conversion - swap the factory plastic cartridge housing for a billet spin-on housing while you have the access.
- TruSeal Oil Gasket Upgrade - peroxide-cured FKM gaskets for the oil filter housing and PCV area you just uncovered.
- Billet PCV Housing Adapter - the starting point for relocating the PCV system on a supercharged 3.0T.
Why Buy From Us?
Engine-specific Pre-CREC and CREC versions, 6061-T6 plates, Viton o-rings and new hardware in the box, in stock at $34.99. It ships from us, and a real person will confirm your version before you order.
-
✅
Enthusiast Designed & Tested: Developed by people who actually drive and modify these cars.
-
✅
Tested on Our Own Cars: If we wouldn't run it ourselves, we don't sell it.
-
✅
Continuous R&D: We continually develop and improve our products instead of relying on generic catalog parts.
-
✅
Supporting Audi Platform Development: Your purchase helps fund continued development of new parts for these chassis.
-
✅
Real Enthusiast Support: Get help from people who understand the platform, not ticket bots.
-
✅
Small Team, Big Passion: Every order directly supports continued product development and innovation.
-
✅
Performance Without the Marketing Fluff: Purpose-built parts designed to perform.
Shop More Parts for Your Audi
Browse every Vorsprung part for your chassis: Audi S4 & S5 B8/B8.5 parts · Audi A6 & A7 C7/C7.5 parts · Audi A6 C6 parts · Audi A8 D4 parts · Audi Q7 4L/4M parts. Or see all Audi 3.0T performance parts.
Drive the difference. Drive Vorsprung.
Vorsprung SAI Delete Plate Set, Audi 3.0T Supercharged EA837 (S4, S5, A6, A7, A8, Q7)
Frequently Asked Questions (FAQ)
What types of products do you offer?
We offer a wide range of high-performance automotive parts including engine components, suspension upgrades, fueling solutions, and custom wheels, all designed to enhance your vehicle’s performance.
Are your products compatible with all car models?
Our products are specifically designed for high-performance vehicles, including luxury and sports cars like Audi. For compatibility details, please refer to the product description or contact our support team for assistance.
How can I ensure the correct fit for my car?
We offer guided fitment assistance for all our products. If you're unsure, feel free to reach out to our customer support team, and we'll help you find the perfect fit for your vehicle.
Where do you ship?
We currently ship to the United States and Canada, with free US shipping on orders over $425. Outside North America? Email orders@vorsprungautowerk.com with your part and address and we'll quote shipping for you.
How do I install the products?
Most of our products come with easy-to-follow installation guides. Additionally, if you need professional installation, we can recommend certified mechanics or shops for assistance.
What is your return policy?
We offer a 14-day return policy for unused products. To be eligible for a return, items must be in their original packaging and in resellable condition. Please refer to our return policy page for detailed instructions.
How can I contact customer support?
You can contact our customer support team via email at orders@vorsprungautowerk.com or through the chat button on the website.
Precision Forged Custom Wheels
At Vorsprung Autowerk, we offer the perfect blend of strength, performance, and style with our custom wheels. Crafted using the finest materials and advanced engineering techniques, our wheels are built to enhance your vehicle's handling and aesthetics.
Key Features
- Monoblock or Multipiece Design
- Custom Spoke Design
- Perfect Fitment Guaranteed
- Multiple Color & Finish Options
- Aircraft-Grade 6061 Aluminum
- Precision Forged for Durability