Vorsprung DynaCore TruSport 65A Engine Mounts (Pair), Audi B8/B8.5 S4, S5, SQ5, A4, A5, Q5, C7 A6, A7, D4 A8
The performance engine mount market has forced Audi owners into a corner for too long. Keep the fragile factory mounts that ride nicely right up until they blow out under tuned power, or bolt in bone-rattling solid mounts that ruin the daily commute. We knew there had to be a better answer. So we engineered it.
The Vorsprung DynaCore TruSport 65A engine mounts for the Audi B8 and B8.5 S4, S5, SQ5, A4, A5 and Q5, plus the C7 A6 and A7 and the D4 A8, wrap a firm 65A rubber body around a tuned fluid core. You get the engine control of a firm performance mount, with a core that soaks up the buzz. Housed in a purpose-built aluminum shell with a motorsport blue finish and a laser-engraved logo, they balance the trifecta: sport, comfort and durability.
How the DynaCore 65A Engine Mount Works
- ✅ Dialed-in power delivery: when you get on the throttle, power should go to the wheels, not into twisting the engine block. The high-density 65A shore hardness rubber holds rigid under heavy tension and torque, cutting drivetrain slop for sharper throttle response and cleaner shifts.
- ✅ Refinement meets response: a connected chassis shouldn't rattle your teeth out at a red light. Encapsulated inside the 65A rubber structure is our dynamic isolation core, an internal fluid chamber tuned to absorb high-frequency engine vibration. Track-day response with daily-driver refinement: the perfect balance of enthusiast dynamics and wife-approval.
- ✅ Built to last: factory fluid-filled mounts put comfort ahead of control and are notorious for early, messy failures, while polyurethane tears under shear and fatigues under compression. A solid-cast 65A rubber body around the fluid core is built not to fatigue, sag or leak under boost.
- ✅ Built-in plug-and-play emulator: plugs into the factory N144/N145 connectors on cars with active engine mounts. No dashboard errors, no coding.
- ✅ Sold as a matched pair, one for each side, so both share the load evenly.
- ✅ Lifetime warranty for the original owner when you buy direct from us.
What You'll Notice Right Away
- ✅ Sharper, more immediate reaction to throttle inputs
- ✅ Cleaner, more predictable gear shifts under heavy acceleration
- ✅ A planted, connected chassis feel without the "racing tax" cabin drone
- ✅ The engine locked down instead of rocking on its mounts
- ✅ No more factory-style fluid leaks
Bottom line: 65A control with a fluid core for the buzz, for $249.99 a pair while this discounted stock lasts.
DynaCore vs SolidCore: Which Vorsprung Mount Fits Your Build?
| DynaCore TruSport 65A | SolidCore TruComfort 45A | SolidCore TruSport 65A | |
|---|---|---|---|
| Construction | 65A rubber around a tuned fluid core | Fluid-free solid 45A rubber | Fluid-free solid 65A rubber |
| Feel | Firm control, with high-frequency buzz absorbed by the core | The softest solid mount we make | Firm and connected; a little more vibration in the cabin |
| Best for | Tuned daily drivers | Stock or lightly modified daily drivers | Tuned and pulleyed cars, hard launches, track days |
| Price (pair) | $249.99 (cosmetic blems) | $299.99 | $299.99 |
For comparison, name-brand performance mount pairs for this platform run about $400 to $550, and genuine Audi replacements list around $570 per side. Want nothing inside to leak at all? The SolidCore motor mounts come in TruComfort 45A or TruSport 65A.
Vehicle Fitment
DynaCore 65A engine mounts fit the Audi B8 and B8.5 S4, S5 and SQ5 with the 3.0T supercharged V6, the B8/B8.5 A4, A5 and allroad with the 2.0T or 3.2L V6, and the B8/B8.5 Q5 with the 2.0T, 3.0T or 3.2L. They also fit the C7 and C7.5 A6 and A7 with the 2.0T or 3.0T supercharged V6, and the D4 A8 3.0T.
B8 and B8.5 cars run from the 2008 through 2016 model years. In North America the A5, S5, Q5 and SQ5 kept the B8.5 chassis for 2017 as well, so if you have a 2017, email your VIN and we'll confirm before you order.
| Make | Model | Chassis | Engine |
|---|---|---|---|
| Audi | S4, S5, SQ5 | B8 / B8.5 | 3.0T V6 Supercharged |
| Audi | A4, A5, allroad | B8 / B8.5 | 2.0T, 3.2L V6 |
| Audi | Q5 | B8 / B8.5 | 2.0T, 3.0T V6 Supercharged, 3.2L V6 |
| Audi | A6, A7 | C7 / C7.5 | 2.0T, 3.0T V6 Supercharged |
| Audi | A8 | D4 | 3.0T V6 Supercharged |
NOTE: Not for the B8 S5 or RS5 with the 4.2 V8, 3.0 TDI models, the 4.0T C7 S6, S7, RS6 and RS7, or B9-generation cars. Direct drop-in replacement for the factory fluid-filled mounts, no modification or tuning required. Not sure? Email your VIN to help@vorsprungautowerk.com and we'll confirm fitment.
Installation Notes
- ✅ Plan a few hours: about 4 to 5 hours for an experienced tech. You'll want an engine support bar, and many owners lower the front subframe roughly 25 to 35 mm for access.
- ✅ Plug in the emulators: connect the factory N144 and N145 plugs to the DynaCore connectors before the engine goes back down.
- ✅ Fresh hardware: owners recommend new factory stretch (torque-to-yield) bolts, torqued to factory spec.
- ✅ Alignment: if you lowered the subframe, mark its position first and get an alignment check afterward.
- ✅ Do it once: replace both sides and the transmission mount in the same visit.
DynaCore 65A Engine Mounts FAQ
What's actually wrong with the discounted units?
Nothing mechanical. The discount reflects minor cosmetic paint defects on the housing only. You get the same mechanical function, engineering and lifetime warranty as full-price units.
How is DynaCore different from the SolidCore TruSport 65A?
Both use 65A rubber. The DynaCore wraps it around a tuned fluid core that absorbs high-frequency vibration, so it feels smoother on a tuned daily driver. The SolidCore TruSport 65A is fully solid rubber with nothing inside, for the most direct feel.
Will the fluid core leak like my factory mounts did?
The fluid chamber is encapsulated inside the solid-cast 65A rubber body, and the mount is built not to fatigue, sag or leak under boost. If it ever fails under normal use, the lifetime warranty covers it.
Will these throw a check engine light or N144/N145 codes?
No. Each mount has a built-in, plug-and-play emulator that plugs into the factory active mount connectors, so there are no dashboard errors and no coding.
Will these fit my B8.5 S4, SQ5, Q5 or C7 A6?
Yes, along with the B8/B8.5 S5, A4, A5 and allroad, the C7/C7.5 A7 and the D4 A8 3.0T. See the fitment table above for engines. They don't fit 4.2 V8, TDI, 4.0T or B9 cars.
Do I need to replace both mounts, or just one?
Both. Replacing only one side can lead to uneven load distribution, faster wear on the new mount and poor drivetrain alignment, which is why the DynaCore is sold as a pair.
What's the warranty?
A lifetime warranty for the original owner when purchased through vorsprungautowerk.com, covering defects in materials and workmanship. If a mount fails under normal use, we replace it at no charge. Proof of purchase and return of the original part for inspection are required, and standard shipping rates apply to replacements.
Why Buy From Us?
65A engine control with a fluid core, the active mount electronics already handled and a lifetime warranty for the original owner, for well under what the name brands charge. They're in stock and ship from us, and a real person will check your VIN before you order.
-
✅
Enthusiast Designed & Tested: Developed by people who actually drive and modify these cars.
-
✅
Tested on Our Own Cars: If we wouldn't run it ourselves, we don't sell it.
-
✅
Continuous R&D: We continually develop and improve our products instead of relying on generic catalog parts.
-
✅
Supporting Audi Platform Development: Your purchase helps fund continued development of new parts for these chassis.
-
✅
Real Enthusiast Support: Get help from people who understand the platform, not ticket bots.
-
✅
Small Team, Big Passion: Every order directly supports continued product development and innovation.
-
✅
Performance Without the Marketing Fluff: Purpose-built parts designed to perform.
Complete Your Build
The car is already apart. Finish the drivetrain while you're under there:
- TruShift Transmission Upgrade Mount (B8/B8.5): 65 durometer rubber at the back of the gearbox, so the whole drivetrain stops moving, not just the front.
- Billet Subframe Inserts (B8/B8.5): fill the voids in the factory subframe mounts for sharper steering response.
- Billet Rear Differential Carrier Inserts (B8/B8.5, C7): firm up the rear of the driveline to match.
- TruShift Mount Upgrade V2 (C7/C7.5 A6, A7): the transmission mount upgrade for C7 owners.
- Billet Subframe Inserts (C7 A6, A7): the subframe insert set for the C7 chassis.
Still deciding? Our Audi B8 S4 engine mounts guide covers failure signs, cost and how to choose, and the engine and transmission mounts collection has every option in one place.
Shop More Parts for Your Audi
Browse every Vorsprung part for your chassis: Audi S4 & S5 B8/B8.5 parts · Audi Q5 & SQ5 B8/B8.5 parts · Audi A6 & A7 C7/C7.5 parts · Audi A8 D4 parts.
Drive the difference. Drive Vorsprung.
Vorsprung DynaCore TruSport 65A Engine Mounts (Pair), Audi B8/B8.5 S4, S5, SQ5, A4, A5, Q5, C7 A6, A7, D4 A8
Frequently Asked Questions (FAQ)
What types of products do you offer?
We offer a wide range of high-performance automotive parts including engine components, suspension upgrades, fueling solutions, and custom wheels, all designed to enhance your vehicle’s performance.
Are your products compatible with all car models?
Our products are specifically designed for high-performance vehicles, including luxury and sports cars like Audi. For compatibility details, please refer to the product description or contact our support team for assistance.
How can I ensure the correct fit for my car?
We offer guided fitment assistance for all our products. If you're unsure, feel free to reach out to our customer support team, and we'll help you find the perfect fit for your vehicle.
Where do you ship?
We currently ship to the United States and Canada, with free US shipping on orders over $425. Outside North America? Email orders@vorsprungautowerk.com with your part and address and we'll quote shipping for you.
How do I install the products?
Most of our products come with easy-to-follow installation guides. Additionally, if you need professional installation, we can recommend certified mechanics or shops for assistance.
What is your return policy?
We offer a 14-day return policy for unused products. To be eligible for a return, items must be in their original packaging and in resellable condition. Please refer to our return policy page for detailed instructions.
How can I contact customer support?
You can contact our customer support team via email at orders@vorsprungautowerk.com or through the chat button on the website.
Precision Forged Custom Wheels
At Vorsprung Autowerk, we offer the perfect blend of strength, performance, and style with our custom wheels. Crafted using the finest materials and advanced engineering techniques, our wheels are built to enhance your vehicle's handling and aesthetics.
Key Features
- Monoblock or Multipiece Design
- Custom Spoke Design
- Perfect Fitment Guaranteed
- Multiple Color & Finish Options
- Aircraft-Grade 6061 Aluminum
- Precision Forged for Durability