Vorsprung Valve Cover Set | Audi 3.0T/3.2L V6 06E103471P/472N

Warped or cracked valve covers are one of those failures that sneak up on you as a slow oil weep before turning into an actual leak you can't ignore. On the 3.0T/3.2L V6, both sides of the engine (cylinders 1-3 and 4-6) get their own cover, and after enough heat cycles the factory units are prone to warping at the sealing surface, letting oil past the gasket line.

The Vorsprung Autowerk Valve Cover Set is a precision-manufactured left and right pair (cross-references to Audi parts 06E103471P and 06E103472N) engineered for the 3.0T/3.2L V6 platform. Left covers cylinders 4-6, right covers cylinders 1-3, and both restore a proper seal against the cylinder head so oil stays where it belongs.

Why Both Covers Tend to Fail Around the Same Time

They live in identical conditions on either side of the same engine, so if one side is showing warp or oil seepage at the gasket line, the other side usually isn't far behind. Replacing them as a pair means you're not pulling the same covers again in another year for the side you skipped.

Key Features & Benefits

• ✅ Precision Fitment — Manufactured to factory dimensions for accurate sealing against the cylinder head. Left and right covers drop in where the originals lived.
• ✅ Built to Take the Heat — Designed to resist the warping that plagues factory covers after years of heat cycling.
• ✅ Stops Oil Leaks at the Source — Restores a proper gasket seal, addressing the slow weep before it becomes a real leak.
• ✅ Complete Left & Right Set — Both sides included, so you're not chasing a mismatched fix on the side you didn't replace.

Bottom line: if you're seeing oil around the valve cover gasket area, replace both sides while you're in there. Doing one and not the other just means you're back under the hood sooner than you'd like.

Note: Replace the valve cover gaskets along with the covers themselves, and inspect the surrounding vent and PCV lines while access is easy.

Fitment

This valve cover set fits the 3.0T/3.2L V6 platform across the following applications.

Left cover (cylinders 4-6) cross-references Audi part 06E103471P. Right cover (cylinders 1-3) cross-references Audi part 06E103472N. Confirm your chassis code before ordering.