Your B8 S4 leaves corners like it is late for something. Slowing it down again, bend after bend, is where things get interesting. Up front the factory setup is a single-piston floating caliper on a 345mm rotor, and owners who push it on track days report a pedal that goes long as the heat builds. An Audi B8 S4 big brake kit fixes the part of braking that actually fades. Our Anker Street big brake kit puts precision-remanufactured Audi RS5 and Q7 calipers and 380mm two-piece rotors on the B8 and B8.5 S4 for $1,849.99.
Why the Factory B8 S4 Brakes Fade
Owner-documented specs put the B8 and B8.5 S4 at a 345mm front rotor and a 330mm rear, with single-piston floating calipers up front. Fine for the school run. But every stop turns speed into heat, and a smaller rotor has less iron to soak it up, so a run of hard stops cooks the pads and fluid. Sound familiar?
- ✅ The pedal goes long and soft late in a session, then firms up once it cools. That is fluid fade.
- ✅ The pedal stays firm, but the car slows less. That is pad fade.
- ✅ You added power with a tune or a crank pulley (see our B8 S4 mods roadmap).
- ✅ Track days or autocross are on the calendar.
One honest note: a big brake kit does not shorten a single stop on its own if your tires are already the limit. What it buys you is consistency. A larger rotor has more swept area and mass to absorb heat, so the tenth hard stop feels more like the first.
Do You Actually Need a Big Brake Kit?
Maybe not, and we would rather you hear it from us. If your S4 mostly commutes, fresh DOT 4 fluid, good pads and stainless lines fix most complaints for far less money (see our brake fluid for Audi guide). Track owners tell a familiar story, though: some who kept pushing the factory calipers with track pads and high-temperature fluid still boiled it, and one who moved to a big brake kit reported no more soft pedal.
- ✅ Daily driving and the odd spirited run: fluid, pads and lines. Want a rotor upgrade without a caliper swap? Our Velocity two-piece floating rotors come in OEM B8 and B8.5 sizing ($699.99 front, $574.99 rear).
- ✅ Back-road weekends, autocross and the occasional track day: the Anker Street kit.
- ✅ Regular track days: the Anker Track big brake kit, plus a look at the rear.
What to Look for in a B8 S4 Big Brake Kit
- ✅ A rotor your wheels can clear. Bigger only helps if it fits.
- ✅ Calipers you can keep serviced. Ask which pads they take.
- ✅ Two-piece rotors. Owners point to lower unsprung weight and less warping.
- ✅ Bolt-on brackets. No grinding, no guesswork.
- ✅ Stainless lines and complete hardware in the box.
- ✅ Pads matched to your driving, street or track.
- ✅ Fitment help before you order, not after the wheels refuse to go back on.
Anker Street vs Typical Name-Brand Kits vs Factory Brakes
The short version: the Anker Street kit pairs precision-remanufactured OEM Audi calipers with 380mm two-piece rotors, billet brackets, SP street performance pads and stainless lines for $1,849.99. Typical name-brand front kits with new six- or eight-piston calipers and 380mm to 390mm two-piece rotors run about $4,300 to $4,900. The factory setup is a 345mm rotor and a single-piston caliper, and online estimates put shop and dealer prices for front pads alone on a 2015 S4 at about $400 to $540. Call it the Audi Tax on stopping.
| Feature | Vorsprung Anker Street | Typical name-brand front kit | Factory B8/B8.5 S4 brakes |
|---|---|---|---|
| Front rotor | 380mm two-piece, 3.8% carbon | About 380mm to 390mm two-piece | 345mm one-piece |
| Calipers | Precision-remanufactured OEM Audi (B9 RS5 and 4M Q7) | New aftermarket, six or eight pistons | Single-piston floating |
| Pads | SP street performance pads | Kit-specific pads | Factory pads |
| Brake lines | Stainless steel, included | Included in most kits | Factory rubber hoses |
| Price | $1,849.99 ($1,899.99 custom color) | About $4,300 to $4,900 | Front pads alone about $400 to $540 at shops and dealers |
| Lead time | Built to order, 45 days | Varies with stock | Not applicable |
| Wheel check | Must clear a 380mm rotor and the RS5/Q7 caliper | Template check; some kits need 19-inch wheels or larger | Fits factory wheels |
Want big-brake consistency without the Audi Tax? The Anker Street big brake kit for the B8 S4 starts at $1,849.99.
Shop the Anker Street Big Brake Kit, $1,849.99
✅ Precision-remanufactured OEM Audi calipers · ✅ Fitment help by VIN at help@vorsprungautowerk.com · ✅ Free US shipping on orders over $425
Anker Street vs Anker Track: Pick by How You Drive
Both kits use precision-remanufactured OEM Audi calipers, billet aluminum brackets, two-piece rotors with 3.8% carbon content and stainless lines, built to order in red, blue, silver or a custom color with a 45-day lead time. The difference is size, pads and how much wheel you need.
- ✅ Anker Street ($1,849.99, custom color $1,899.99): B9 RS5 and 4M Q7 calipers, 380mm rotors and SP street pads, aimed at spirited street driving and occasional track use.
- ✅ Anker Track ($2,049.99, custom color $2,099.99): SQ7 and SQ8 calipers, 400mm floating rotors and a .45μ track pad, built for repeated hard stops on track.
Why does 3.8% carbon matter? It sits in the high-carbon range foundries use for brake discs (about 3.6% to 3.9%, versus roughly 3.25% for standard rotor iron), which brake material specialists credit mainly with better noise damping and slightly better heat transfer.
Wheel clearance decides the rest. Per the listings, confirm your wheels clear a 380mm rotor and the RS5/Q7 caliper for Street, or the 400mm rotor and SQ7/SQ8 caliper for Track, especially with wheels smaller than 20 inches. Our wheel offset and brake clearance guide shows how to check, and the Audi wheel fitment guide covers B8 offsets.
What Is in the Anker Street Kit and Why
- ✅ A front pair of B9 RS5 and 4M Q7 calipers, precision-remanufactured OEM Audi units with a factory pad shape.
- ✅ 380mm two-piece rotors, 35mm more diameter than the factory rotor for more leverage and a bigger friction ring to soak up heat.
- ✅ Billet aluminum caliper brackets machined for a rigid, bolt-on fit.
- ✅ SP street performance pads chosen for these rotors and calipers.
- ✅ Stainless steel brake lines that skip the flex of factory rubber hoses.
- ✅ All the bolts, washers and shims.
Kits are built to order, so place your order, then email orders@vorsprungautowerk.com with your color and rotor design. Per the listing, caliper logos in product photos are for illustration only and are not supplied.
Rear Kit, DIY Brackets and Replacement Rotors
Weight moves forward when you brake, so the front axle does most of the work and is the place to start. Planning hard track use? The Haken Street rear big brake kit ($1,599.99, custom color $1,649.99) adds a four-piston rear caliper, a dedicated electronic parking brake caliper that takes your existing motor, 356mm two-piece rotors, 7075 billet brackets, SP pads, stainless lines and 12.9-grade hardware. The B8 S4 uses an electronic parking brake, but confirm yours first, as the listing asks.
Building your own setup? The Vorsprung BBK adapter ($249.99) is a 7075-T6 aluminum bracket with 12.9-grade hardware in three versions: B9 calipers with 350mm B9 rotors, Q7 or RS5 calipers with 375mm Q7 rotors, or SQ7 and SQ8 calipers with 400mm C7 S6 rotors. The 375mm version calls for calipers 4M0615107BS or 8W0615107AM (left) and 4M0615108BS or 8W0615108AM (right) with 4M0615301AS rotors.
When rotors wear out, our Velocity two-piece floating rotors come in 400mm for the Anker Track kit and in OEM B8 and B8.5 sizing. Every brake part we sell lives in our Audi brakes collection.
Fitment: B8 and B8.5 S4 and the Rest of the Family
Per its listing, the Anker Street kit fits the B8 and B8.5 A4 and S4, which covers the 2010 to 2012 B8 S4 and the 2013 to 2016 B8.5 S4 with the supercharged 3.0T (EA837). It also fits the B8 and B8.5 A5 and S5, the Q5 and SQ5, and the C7 and C7.5 A6, S6, A7 and S7, and the Anker Track kit lists the same cars. The Haken Street rear kit and the BBK adapter both fit the B8 and B8.5 A4, S4, A5 and S5, and the adapter also covers the C7 and C7.5 A6, S6 and A7. Not sure? Email your VIN and wheel specs to help@vorsprungautowerk.com before you order.
Install Notes: Time, Tools and Tips
A front kit is a bolt-on job for a confident DIYer. One owner reports a similar B8 front caliper swap took under 2 hours, another says the bleed is the slowest part, and an independent performance shop quoted $150 plus fluid for that swap.
Tools: jack and stands, a torque wrench, metric sockets, a flare-nut wrench, a pressure bleeder or a helper, and fresh fluid that meets Audi's DOT 4 spec. Doing the rear too? Add a scan tool that can put the electronic parking brake into service mode.
- Test-fit first. Bolt a wheel on over the new caliper and turn it by hand to check spoke and barrel clearance before you bleed anything.
- Use the kit's hardware and the torque values from the kit instructions or Audi's service information.
- Route the lines without twists and check them at full lock both ways.
- Bleed thoroughly and never let the reservoir run dry.
- Bed in the pads per the pad maker's procedure before hard driving.
- Check the spare. One owner found the factory space-saver would not clear his aftermarket front calipers.
Audi B8 S4 Big Brake Kit FAQ
Is a big brake kit worth it on a B8 S4?
If you drive hard on back roads, run autocross or do track days, yes, because the factory single-piston calipers and 345mm rotors run out of heat capacity first. If you mostly commute, fresh fluid, good pads and stainless lines may be all you need.
Will the Anker Street kit fit my wheels?
Wheel clearance varies by wheel design. Per the listing, confirm your wheels clear a 380mm rotor and the RS5/Q7 caliper before ordering, or email your wheel specs and VIN to help@vorsprungautowerk.com.
What is the difference between the Anker Street and Anker Track kits?
Street uses remanufactured B9 RS5 and 4M Q7 calipers, 380mm two-piece rotors and SP street pads for $1,849.99. Track uses remanufactured SQ7 and SQ8 calipers, 400mm floating rotors and a track pad for $2,049.99, and needs more wheel clearance.
Does a big brake kit shorten stopping distance?
Not on its own if your tires are already the limit. Its job is consistency: more rotor and caliper to absorb heat, so braking holds up stop after stop.
Do I need to upgrade the rear brakes too?
Not to start. Weight moves forward under braking, so the front does most of the work. For hard track use, the Haken Street rear kit adds 356mm two-piece rotors and keeps the factory electronic parking brake working.
How long does it take to install a front big brake kit on a B8 S4?
One owner reports a similar B8 front caliper swap in under 2 hours, with the bleed taking the longest. Add time for a test fit, a full bleed with fresh DOT 4 fluid and the pad bed-in.
How long does it take to get an Anker kit?
Each kit is built to order for color and rotor design, with a 45-day lead time per the listing. Place your order, then email orders@vorsprungautowerk.com with your choices.
Bottom Line on the B8 S4 Big Brake Kit
Your B8 S4 was never short on go. Once you use it, the factory single-piston fronts are the weak link, and a big brake kit fixes the part that fades. For spirited street driving and the occasional track day, the Anker Street big brake kit for the Audi B8 S4 brings remanufactured Audi RS5 and Q7 calipers and 380mm two-piece rotors for less than half of what typical name-brand kits cost. Check your wheels, then pick your color.
Shop the Anker Street Big Brake Kit, from $1,849.99
Drive the difference. Drive Vorsprung.
Prices checked October 27, 2026 and subject to change. Labor figures are owner-reported or typical shop quotes.

