Two engines wear the same 3.0T badge, whine through a Roots supercharger in the same spot and look like twins with the engine cover on. Order parts for the wrong one and you get a thermostat housing that almost fits, which is the most expensive kind of fit. This Audi 3.0T CREC vs Gen 1 guide shows you how to read your engine code, which US cars got which engine and exactly which parts change, starting with our billet Audi 3.0T CREC thermostat housing for the 2016 to 2018 A6 and A7, the 2015 to 2018 A8 and the 2017 to 2019 Q7.
What Is the Audi 3.0T CREC Engine?
CREC is not a nickname. It is the four-letter engine code on the updated supercharged V6 in late US-market A6, A7, A8 and Q7 models. Audi's technician training material (Self Study Program 624) calls this update the EA837 evo, enthusiasts call it Gen 2, and Gen 1 covers every earlier supercharged 3.0T. What changed? Plenty:
- ✅ Supercharger clutch: an electromagnetic clutch lets the blower switch off. Gen 1 blowers are driven all the time.
- ✅ Port injection added: the evo pairs port injectors with the direct injectors.
- ✅ New crankcase ventilation: venting runs through one cylinder bank, with a different PCV valve.
- ✅ Revised hardware: both camshafts are adjustable, and Audi reworked the cooling and oil cooler layout.
- ✅ Different engine management: owners report Simos 16 on CREC versus Simos 8 on Gen 1.
Why care if the car drives fine? Because the parts that fail live under the supercharger, exactly where the two engines differ. Order the wrong PCV valve and you find out with the blower already off, the most Audi Tax way possible to learn your engine code.
How to Tell If You Have a CREC Engine
1. Read the vehicle data label
The label in the luggage compartment lists the VIN plus the engine and transmission codes. The 2015 A8 owner's manual puts it in the spare wheel well; the 2017 Q5 manual puts it above the vehicle tool compartment. CREC means CREC. Some 2018 A6 and A7 Competition owners report a CREH code, which owners describe as the same engine with a different calibration, and our CREC listings fit those cars by model year.
2. Check the Warranty and Maintenance booklet
Both manuals say the same codes are printed there. Handy when the trunk label is scuffed or buried under a subwoofer box.
3. Read the code on the engine
The code is also on the engine itself, as our CREC kit listing notes. Bring a flashlight.
4. Filter by model year, then confirm by VIN
In the US, CREC only appeared in the cars listed above. On a changeover year like a 2015 A8, or on an imported car, email your VIN to help@vorsprungautowerk.com and we will confirm before you order.
Audi 3.0T Engine Codes by Car: Which Models Have CREC?
Here is the US-market split from our own fitment listings. Note that US-market B8.5 S4 and S5 never received the CREC engine, although CREC versions were sold in other markets.
| Car | US model years | Engine | PCV valve |
|---|---|---|---|
| B8 S4, S5 Cabriolet | 2010-2012 | Gen 1 | 06E103547AC |
| C6 A6 3.0T | 2009-2011 | Gen 1 | 06E103547AC |
| C7 A6, A7 | 2012-2015 | Gen 1 | AC (built before May 2012) or AK |
| 4L Q7 3.0T | 2011-2015 | Gen 1 | 06E103547AK |
| B8.5 S4 | 2013-2016 | Gen 1 | 06E103547AH |
| B8.5 S5, Q5 3.0T | 2013-2017 | Gen 1 | 06E103547AH |
| SQ5 | 2014-2017 | Gen 1 | 06E103547AH |
| D4 A8 3.0T | 2013-2014 | Gen 1 | 06E103547AH |
| C7.5 A6, A7 | 2016-2018 | CREC | 06E103547AF |
| D4 A8 3.0T (facelift) | 2015-2018 | CREC | 06E103547AF |
| 4M Q7 3.0T | 2017-2019 | CREC | 06E103547AF |
| B9 S4, S5, SQ5; C8 A6, A7; D5 A8; later Q7, Q8 | Turbo era | EA839 turbo, not CREC | Not applicable |
Audi 3.0T CREC vs Gen 1: The Parts That Differ
Straight from our listings: the thermostat housings are different parts, our Gen 1 Non-Evo billet housing for Gen 1 and our Gen 2 CREC billet housing for CREC. The PCV valve goes from 06E103547AC, AH or AK to 06E103547AF. The upper intake manifold gaskets (079129717D) and the PCV to supercharger adapter pipe (06E103213) are the same in our B8.5 and CREC kits, but the lower gaskets change from 079129717B to 06E129717F. Injector seals go from the Elring 06E998907E kit, sold per injector, to the 06E998907F kit that covers all six direct injectors. Gen 1 has a plastic heater pipe that CREC skips, and only CREC has the supercharger clutch.
| Part | Gen 1 EA837 | CREC (EA837 evo) |
|---|---|---|
| Thermostat housing | Gen 1 Non-Evo billet housing, $149.99, or $199.99 with a Motorad thermostat | Gen 2 CREC billet housing, $99.00, or $149.99 with a Rein thermostat |
| PCV valve | 06E103547AC, AH or AK, by car and build date | Hengst 06E103547AF, $199.99 |
| Upper intake manifold gaskets | Elring 079129717D | Elring 079129717D (same part) |
| Lower intake manifold gaskets | Elring 079129717B (B8.5 kit) | Elring 06E129717F |
| PCV to supercharger adapter pipe | 06E103213 | 06E103213 (same part) |
| Injector seals | Elring 06E998907E, $12.95 per injector (order six) | 06E998907F reseal kit, $59.99 for all six direct injectors |
| Heater pipe | Plastic 06E121065N; our B8.5 kit swaps in aluminum | Not used |
| Supercharger clutch | None, the blower is always driven | Electromagnetic clutch; billet clutch delete, $179.99 (pre-order, tune required) |
| Under supercharger kit | B8.5 kit from $649.99 (other Gen 1 kits by car) | Gen 2 CREC kit from $649.99 |
Got a CREC? Our Gen 2 CREC billet thermostat housing replaces the factory plastic housing with machined aluminum, with or without the thermostat.
Shop the CREC Thermostat Housing, from $99.00
✅ Rein, Motorad, Hengst, Elring and Graf OE-supplier parts · ✅ Fitment help by VIN at help@vorsprungautowerk.com · ✅ Free US shipping on orders over $425
What's in Our CREC Thermostat Housing and Why
Audi built the factory housing from plastic and mounted it in the hot valley, where heat cycles and coolant leave it brittle until it cracks and dumps coolant. Replacing failed plastic with fresh plastic is how you pay the Audi Tax twice. Our CREC housing is billet, shaped for the CREC engine:
- ✅ 6061-T6 billet aluminum, anodized for corrosion resistance.
- ✅ Ready to drop in: pre-assembled with a Rein thermostat, OE gaskets, all hardware and new bolts for $149.99.
- ✅ Housing-only option: everything except the thermostat for $99.00.
- ✅ CREC only: Gen 1 cars take our separate Gen 1 Non-Evo housing.
Want design details and install tips? Our Audi 3.0T billet thermostat housing guide covers both versions, and our Audi 3.0T supercharged engine guide walks through every common failure on the platform.
Fitment: Which Part for Which Car
CREC cars: Our CREC billet thermostat housing fits the 2016 to 2018 A6 (front-drive and quattro), the 2016 to 2018 A7, the 2015 to 2018 A8 and the 2017 to 2019 Q7 with the CREC engine. The Gen 2 CREC under supercharger kit and the Hengst 06E103547AF PCV valve cover the same cars. The 06E998907F injector reseal kit lists the 2016 to 2018 A6 and A7 quattro, the 2015 to 2018 A8 and the 2017 to 2018 Q7, so 2019 Q7 and front-drive A6 owners should send a VIN first. The billet supercharger clutch delete fits CREC engines with the 4-bolt supercharger pulley in the C7.5 A6 and A7, the 2015 to 2018 A8 and the 4M Q7, and is on pre-order with stock arriving late November 2026.
Gen 1 cars: The Gen 1 Non-Evo billet thermostat housing covers Gen 1 cars from the 2009 C6 A6 through the 2017 S5, Q5 and SQ5. The B8.5 under supercharger kit fits the 2013 to 2016 S4, the 2013 to 2017 S5 and Q5 3.0T, the 2014 to 2017 SQ5 and the 2013 to 2014 A8; the other Gen 1 cars are sorted in our under supercharger kit chooser. The Elring 06E998907E injector seal kit is sold per injector, so order six.
Per their listings, neither billet housing is for sale or use in California on pollution-controlled vehicles. Need more than one part? Browse both engines in our Audi 3.0T performance parts collection.
Install Notes: Same Job, Different Details
Time: On both engines the thermostat housing, PCV valve and intake manifold gaskets sit under the supercharger, so the blower comes off. Plan the job once. Our clutch delete listing says to budget real shop time, or a few hours if you are doing it yourself and are comfortable working in there.
Tools: The PTFE combustion seals in the 06E998907F kit need a seal sizing tool. Our Audi 3.0T injector seal guide covers both kits and a leak-free install.
- ✅ Replace the injector seals any time an injector comes out.
- ✅ Label every vacuum and PCV line before it comes off.
- ✅ On CREC, the clutch has its own electrical connector, and our clutch delete includes a plug for it.
- ✅ Chasing power later? CREC pulleys and ported blowers are engine-specific, and tuners commonly pair CREC pulley upgrades with a clutch delete. See our Audi 3.0T ported supercharger guide.
- ✅ Tired of the PCV valve living under the blower? Read our Audi 3.0T PCV relocation guide.
Not a CREC: The EA839 Turbo 3.0T
Here is where the badges get sneaky. Starting with the B9 S4, Audi replaced the supercharged V6 with a completely new turbocharged V6, the EA839. B9 S4, S5 and SQ5 owners, plus C8 A6 and A7, D5 A8 and later Q7 and Q8 owners, have neither a Gen 1 nor a CREC engine, and none of the parts above fit. Start with our Audi EA839 thermostat housing guide instead.
Audi 3.0T CREC vs Gen 1 FAQ
How do I know if my Audi 3.0T is a CREC or a Gen 1 engine?
Read the engine code on the vehicle data label in the luggage compartment or in your Warranty and Maintenance booklet. CREC, or CREH on some 2018 A6 and A7 Competition cars, means the CREC engine. Anything else? Email your VIN to help@vorsprungautowerk.com and we will confirm.
Which Audi models have the CREC engine?
In the US, the 2016 to 2018 A6 and A7 (C7.5), the 2015 to 2018 A8 (D4 facelift) and the 2017 to 2019 Q7 (4M). Every earlier supercharged 3.0T, including every US-market B8 and B8.5 S4, S5, Q5 and SQ5, is a Gen 1 engine.
Did the B8.5 S4 or S5 ever get the CREC engine?
Not in the US. US-market B8.5 S4 and S5 stayed Gen 1 to the end. CREC versions were sold in other markets, so check the engine code on any imported car.
Do Gen 1 parts fit a CREC engine?
Some do. In our kits, the upper intake manifold gaskets (079129717D) and the PCV to supercharger adapter pipe (06E103213) are shared. The thermostat housing, PCV valve, lower intake gaskets and injector seals are different.
Is the EA839 3.0T a CREC engine?
No. The EA839 is a completely new turbocharged V6 that replaced the supercharged engine, starting with the B9 S4. It has no supercharger, and none of the Gen 1 or CREC parts in this guide fit it.
What does the CREC supercharger clutch do?
Audi's training material for the EA837 evo describes an electromagnetic clutch that lets the supercharger switch off, while a Gen 1 supercharger is driven all the time. Our billet clutch delete replaces it with a solid 7075 aluminum puck. Plan on a tune, or the car will set a check engine light.
Can I use a Gen 1 tune on a CREC car?
No. Owners report that CREC cars run Simos 16 engine management instead of the Gen 1 Simos 8, and CREC software is sold separately. Give your tuner the engine code before you buy.
Bottom Line
Gen 1 or CREC takes one look at a sticker to answer and a lot of money to get wrong. Read the code, match it to the tables above and order once. CREC owners, start with our Audi 3.0T CREC billet thermostat housing or the full CREC under supercharger kit; Gen 1 owners, grab the Gen 1 billet housing. Still not sure? Send us the VIN.
Get the CREC Thermostat Housing, from $99.00
Drive the difference. Drive Vorsprung.
Prices checked November 3, 2026 and subject to change.


