The Audi S4 B8 vs B8.5 question sounds like trivia until you are standing at the parts counter. Same supercharged 3.0T, same quattro grip, same habit of cooking plastic parts under the supercharger. So why does every catalog demand your model year? Because the 2013 facelift changed more than the headlights. The PCV valve, the water pump part number and the steering system all changed, and the wrong part means pulling the supercharger twice. If your S4 is a 2010 to 2012 car, the first thing to budget for is our OE Ultimate Under Supercharger Kit for the B8 S4, built around the 06E103547AC PCV valve. Here is how to tell which car you have and exactly what fits it.
Quick answer: In the US, the B8 S4 covers the 2010 to 2012 model years and the facelifted B8.5 covers 2013 to 2016 (the B8.5 S5 ran through 2017). Both use the Gen 1 supercharged 3.0T, but B8.5 cars take a different PCV valve (06E103547AH instead of 06E103547AC), a different water pump part number and electromechanical steering instead of hydraulic. Plenty of performance parts carry over, including our titanium intake, engine mounts and headers.
B8 vs B8.5 S4: Model Years and How to Tell Them Apart
The B8.5 is a facelift, not a clean-sheet redesign, which is exactly why mix-ups happen. The five-minute check:
- ✅ Model year. The 10th character of the VIN is the model year code: A, B or C means a 2010 to 2012 B8, while D, E, F or G means a 2013 to 2016 B8.5.
- ✅ Headlights. Audi redesigned the headlamps and the LED daytime running light design for 2013. Owners describe the B8 daytime lights as a row of individual LED dots and the B8.5 lights as one continuous strip.
- ✅ Bumpers and grilles. The facelift reshaped the bumpers around angular air inlets, and owners point to different fog light grilles as an easy tell.
- ✅ Power steering reservoir. B8 cars use hydraulic power steering with a fluid reservoir under the hood, while B8.5 cars use electromechanical steering with no fluid at all. Our guide to which Audis still use power steering fluid has the full list.
- ✅ The S5 twist. In the US, the 2008 to 2012 B8 S5 coupe used the 4.2 V8. Only the 2010 to 2012 S5 Cabriolet got the supercharged 3.0T, and every 2013 to 2017 B8.5 S5 has it.
Both run the Gen 1 (non-CREC) EA837 engine, and our guide to Gen 1 vs CREC 3.0T engines shows where to read the engine code on your own car.
What Audi Changed for the 2013 B8.5 Facelift
Audi's 2013 A4 and S4 launch material reads like a warning label for parts shoppers:
- ✅ Lighting and body. Redesigned headlamps with a new LED daytime running light design, redesigned optional LED taillights and reconfigured bumpers. Lights, bumpers and grilles are year-specific, so shop them by model year.
- ✅ Steering. A new electromechanical system replaced the hydraulic setup, taking the power steering pump and fluid with it.
- ✅ Center differential. Audi's 2013 S4 media information says S tronic models gained the crown-gear center differential (our Torsen vs Haldex guide explains it).
- ✅ Under the supercharger. The facelift engine is cataloged for a different PCV valve and water pump than the B8, which is why our kits are split by generation.
What did not change? The core recipe: the same Gen 1 supercharged 3.0T, the same six-speed manual or seven-speed S tronic choice in the S4, and the same weak spots in the valley. Good news for upgrades: many bolt-on performance parts fit both.
B8 vs B8.5 Parts Fitment: What's Different and What's Shared
The short version: the PCV valve, water pump and PCV breather pipe changed with the facelift, so a B8 needs the 06E103547AC valve and a B8.5 needs 06E103547AH. The thermostat housing, heater pipe, intake gaskets, injector seals and PCV-to-supercharger adapter pipe share part numbers across both of our kits, and our titanium intake V2, DynaCore engine mounts and HEH Headers V2 are listed for both generations.
| Part or system | B8 (2010 to 2012 S4 and S5 Cabriolet) | B8.5 (2013 to 2016 S4, 2013 to 2017 S5) | Same part? |
|---|---|---|---|
| Power steering | Hydraulic, with fluid reservoir | Electromechanical, no fluid | No |
| Headlights, bumpers, grilles | Pre-facelift design | Redesigned for 2013 | No |
| PCV valve | Hengst 06E103547AC, $114.99 | Hengst 06E103547AH, $149.99 | No |
| Water pump in our kits | Graf, replaces 06E121018A | Graf, replaces 06E121018N | No |
| PCV breather pipe to intake | 06E103207P, included in the B8 kit | 06E103207AC on most cars, 06E103207P on early-production 2013 S4 and S5 | Depends on build date |
| Thermostat housing, heater pipe, intake gaskets, injector seals, PCV adapter pipe | Same part numbers in both kits | Same part numbers in both kits | Yes |
| Under supercharger kit | B8 under supercharger kit, from $574.99 | B8.5 under supercharger kit, from $649.99 | No |
| Titanium Intake V2 | Listed for B8 | Listed for B8.5 | Yes |
| DynaCore 65A engine mounts, $249.99 a pair | Listed for B8 | Listed for B8.5 | Yes |
| HEH Headers V2 | Listed for B8 | Listed for B8.5 | Yes |
Headers note: For off-road and competition use. Check your local emissions and inspection rules before modifying your exhaust.
Got a 2010 to 2012 car? The B8 S4 under supercharger kit is the one built for your PCV valve and water pump, and it even includes the 06E103207P breather pipe that B8.5 owners have to add separately.
Shop the B8 S4 Under Supercharger Kit, $574.99
✅ Graf, Hengst and Elring OE-supplier parts · ✅ Fitment help by VIN at help@vorsprungautowerk.com · ✅ Free US shipping on orders over $425
Driving a 2013 or newer? Grab the B8.5 S4 under supercharger kit instead, from $649.99.
Inside Each Under Supercharger Kit, and Why the Differences Matter
Why buy a whole kit when one part failed? On both generations the thermostat housing, water pump and PCV valve live under the supercharger, and the labor dwarfs the parts. An independent estimator puts a thermostat replacement alone at roughly $1,170 to $1,520 on a 2010 S4 and $1,020 to $1,370 on a 2013. One labor-time database lists 6 to 8 hours for the thermostat and water pump together on a 2011 S4, and a 3.0T owner reported a shop quote of about 5 hours just to pull the supercharger for the PCV valve and thermostat. The dealer will happily swap your cracked plastic housing for a fresh plastic one, Audi Tax included.
What's in the B8 kit (2010 to 2012)
- ✅ Complete billet aluminum thermostat housing with the thermostat (replaces 06E121111AL)
- ✅ Aluminum heater pipe (replaces 06E121065N)
- ✅ Graf metal water pump (replaces 06E121018A)
- ✅ OEM Hengst PCV valve 06E103547AC
- ✅ Elring upper (079129717D) and lower (079129717B) intake manifold gaskets, six of each
- ✅ Genuine PCV-to-supercharger adapter pipe 06E103213
- ✅ Elring injector seal kit 06E998907E
- ✅ OEM crankcase breather hose 06E103207P with clamp N10203601
What changes in the B8.5 kit (2013 and newer)
The B8.5 under supercharger kit keeps the same housing, heater pipe, Elring gaskets, injector seals and adapter pipe, then swaps in a Graf water pump that replaces 06E121018N and the Hengst 06E103547AH PCV valve. The breather pipe is not included: its listing notes most B8.5 cars take 06E103207AC while early-production 2013 S4 and S5 cars take 06E103207P. Both kits offer a GLT TruSeal intake gasket upgrade (+$25), the 06A919501A coolant temperature sensor (+$20) and coolant (+$25).
Fitment: Which Kit and PCV Valve Fit Your Car
Here is our listing fitment in plain English:
- ✅ B8 kit and PCV valve 06E103547AC: 2010 to 2012 B8 S4, 2010 to 2012 B8 S5 Cabriolet and 2009 to 2011 C6 A6. Order the complete B8 under supercharger kit or the 06E103547AC PCV valve on its own.
- ✅ B8.5 kit and PCV valve 06E103547AH: 2013 to 2016 B8.5 S4, 2013 to 2017 B8.5 S5 coupe and Cabriolet, 2013 to 2017 Q5 3.0T, 2014 to 2017 SQ5 and 2013 to 2014 D4 A8 3.0T. Order the B8.5 kit or the 06E103547AH PCV valve on its own.
- ✅ 2013 S4 and S5: Audi split some 2013 production by build date for the PCV breather pipe. The build month is on the sticker in the driver's door jamb, and a VIN check settles it.
- ✅ Still not sure? Audi sometimes changed PCV part numbers partway through a model year, so email your VIN to help@vorsprungautowerk.com and we will confirm before you order.
Driving a C7 A6 or A7, or a 4L Q7? Those cars take different PCV valves and kits, and our 3.0T under supercharger kit chooser covers every platform. Everything else for your car lives in our Audi S4 and S5 B8 and B8.5 performance parts collection.
Install Notes for Either Generation
- ✅ Plan for a supercharger-off job. Book a full shop day or clear a weekend in your own garage.
- ✅ Confirm parts before teardown. Check the PCV valve and water pump against your VIN before the supercharger comes off, not after.
- ✅ Replace the gaskets and injector seals every time. Both kits include Elring intake manifold gaskets and injector seals for exactly that reason.
- ✅ Refill and bleed carefully. Follow the repair manual's fill and bleed procedure, then recheck the coolant level cold after the first few drives.
- ✅ Shared upgrades install the same way on both. The titanium intake ships with a coupler for the factory throttle body, and its listing says no dedicated tune is required just to install it. The DynaCore listing estimates about 4 to 5 hours for an experienced tech with an engine support bar.
Audi S4 B8 vs B8.5 FAQ
What years are the B8 and B8.5 Audi S4?
In the US, the B8 S4 covers the 2010 to 2012 model years and the facelifted B8.5 covers 2013 to 2016. The B8.5 S5 coupe and Cabriolet ran from 2013 to 2017.
How can I tell if my S4 is a B8 or a B8.5?
Start with the model year: 2013 and newer is a B8.5, and the 10th character of the VIN is D or later. The facelift also brought redesigned headlights with a new LED daytime running light design and electromechanical steering, so a B8.5 has no power steering fluid reservoir.
Do the B8 and B8.5 S4 have the same engine?
Both use the Gen 1 supercharged 3.0T V6 (EA837), but the facelift engine is cataloged for a different PCV valve (06E103547AH instead of 06E103547AC) and a different water pump part number. That is why under supercharger kits are sold by generation.
Do B8 parts fit a B8.5 S4?
Many performance parts do. Our titanium intake V2, DynaCore engine mounts and HEH Headers V2 are listed for both. The PCV valve, water pump, under supercharger kit, steering parts and headlight and bumper parts are generation-specific.
Which under supercharger kit fits a 2012 vs a 2013 S4?
A 2010 to 2012 S4 takes the B8 kit with PCV valve 06E103547AC. A 2013 to 2016 S4 takes the B8.5 kit with 06E103547AH. Early-production 2013 S4 and S5 cars also use the earlier 06E103207P breather pipe, so send your VIN if you have a 2013.
Is the B8.5 S4 more reliable than the B8?
Both share the same known weak spots under the supercharger: the plastic thermostat housing, the water pump and the PCV valve. The facelift uses different part numbers for the PCV valve and water pump, but either generation benefits from replacing those parts together while the supercharger is off.
Bottom Line on the Audi S4 B8 vs B8.5
The Audi S4 B8 vs B8.5 split comes down to a handful of parts that matter a lot. Know your model year, order by VIN when in doubt, and do the valley once. For 2010 to 2012 cars that means the B8 S4 under supercharger kit, and for 2013 and newer the B8.5 kit. Wondering what comes after the valley? Our B8 and B8.5 S4 mods roadmap, our supercharged S4 ownership guide and our guide to performance parts for the Audi S4 pick up where this one ends.
Shop the B8 S4 Under Supercharger Kit, $574.99
Drive the difference. Drive Vorsprung.
Prices checked November 4, 2026 and subject to change. Repair cost and labor figures are third-party estimates, owner reports or typical shop quotes.


