You tuned the car, maybe added a crank pulley, and now the supercharger is pushing air through ports Audi cast for the assembly line, not for airflow. An Audi 3.0T ported supercharger fixes that bottleneck inside the factory Eaton R1320 (TVS1320) case, and you do not need a new blower at Audi Tax prices to get one. Send the supercharger you already own to our Artus-Sturm street ported supercharger service and it comes back ported, cleaned and refilled with fresh oil about two weeks after it arrives, return shipping included.
Why the Factory Supercharger Leaves Airflow on the Table
Audi's self-study guide for the 3.0 TFSI describes an Eaton Roots-type blower with two four-lobe rotors, each twisted 160 degrees, sharing one cast housing with the bypass valve and two intercoolers in the V of the engine. Brilliant package, but it is a casting made by the thousands, and every rough surface and pinch point between inlet and outlet costs flow.
Is your car ready for a port? Look for these signs:
- ✅ You run a tune, or are booking one, and want more from the blower without changing your pulley.
- ✅ The supercharger is coming off anyway for the PCV valve, thermostat or water pump.
- ✅ Your blower has big miles and you want fresh oil, and maybe bearings, while it is apart.
- ✅ You are adding a smaller crank pulley or a bigger throttle body.
- ✅ Your fuel system has headroom for more air.
Staying completely stock? Skip it: porting pays off once a tune uses the added airflow. Planning the whole build? See our Audi S4 mods roadmap and our Audi supercharger upgrade guide.
How Porting Works on the Eaton R1320
Porting re-profiles the inlet and outlet ports of the case so air takes a smoother, freer route into and out of the rotors. More airflow at the same pulley and engine speed is where the extra boost comes from. Same rotors, same housing, better path.
The factory bypass flap explains how it feels. Per Audi's training material, the flap stays closed at wide open throttle, so all the air goes through the rotors, and opens at part throttle, idle and coasting to recirculate air. That is why one long-time owner reports that a ported blower feels the same as stock at part throttle, with the difference showing up when you floor it.
One caution: more metal removed is not automatically better. Long-time owners warn that past a point a port mostly makes heat, and one well-known porter cautions that removing too much material can let the case flex. A proven profile beats a heroic one.
What to Look for in a Ported Supercharger Service
Before you ship anything, check for:
- ✅ A proven profile: a street option, plus a more aggressive one only for built cars.
- ✅ A real decontamination step, because porting makes aluminum shavings.
- ✅ Fresh supercharger oil. Audi treats it as a lifetime fill, so a port job is the time to refresh it.
- ✅ A bearing option for high-mileage units, priced up front.
- ✅ Separate Gen 1 and CREC handling.
- ✅ A published turnaround and a no-downtime option.
- ✅ Straight talk on tuning: there is no magic ported supercharger tune file.
Street Port vs Race Port: Which One Fits Your Build?
Both services use the same five-step process. The race port simply takes the port work further.
- ✅ Street port: a precision re-profile of the inlet and outlet ports for daily drivers on a stock or light Stage tune, or anyone who wants to start modestly. From $749.99 with your core.
- ✅ Race port: a more aggressive, race-spec job for built cars with the tune and fuel headroom to use it. The Gen 1 race ported supercharger service starts at $1,024.99 with your core.
A race port moves the bottleneck to your tune, fuel system, spark and throttle body. Owners report running into fuel system limits, with high-pressure pump duty and injector duration climbing, and one experienced porter reported ring failures on cars that paired aggressive ports with ethanol blends and very aggressive setups.
Ported Supercharger Cost: Ours vs Name-Brand vs a New Factory Unit
The numbers: our Gen 1 street port starts at $749.99 and the race port at $1,024.99 with your core, return shipping included. CREC versions add $250 for the extra machine work, and pre-ported Gen 1 street units without a core start at $1,449.99. The name-brand porting services and ported units we checked run about $1,550 to $2,400, with published lead times of three to eight weeks. A new factory supercharger (06E145601BC, which replaces numbers such as 06E145601L and 06E145601AN) sells for about $5,590 on an Audi dealer parts site, with the same port shape you are trying to fix. Audi Tax at full strength.
| Feature | Vorsprung Artus-Sturm port | Typical name-brand ported units | New factory supercharger |
|---|---|---|---|
| Starting price | $749.99 street, $1,024.99 race, with your core | About $1,550 to $2,400 | About $5,590 (06E145601BC) |
| Port work | Inlet and outlet ports, street or race profile | Varies by shop | None |
| Turnaround | About 2 weeks, return shipping included | About 3 to 8 weeks where published | Depends on dealer stock |
| Cleaning and oil | Decontamination wash, fresh oil | Fresh oil on most we checked | New unit |
| Bearings | Optional rebuild, +$100 | Included with some | New |
| Gen 1 and CREC | Separate listings for each | Some are Gen 1 only | Varies by engine |
The lowest-cost route in that table is our Audi 3.0T ported supercharger service, and you keep the blower you already know.
Shop the Street Ported Supercharger Service, from $749.99
✅ Your factory Eaton R1320, ported and refreshed · ✅ Fitment help by VIN at help@vorsprungautowerk.com · ✅ Free US shipping on orders over $425
What You Get With the Artus-Sturm Service
- Disassembly and inspection, with the factory oil drained.
- Precision porting of the inlet and outlet ports by our porting partner, to the profile you ordered.
- Decontamination to remove every metal shaving and bit of debris.
- Reassembly and a fill of premium-grade supercharger oil.
- Optional bearing rebuild, +$100, for a high-mileage unit.
Ordering is three choices. "Sending in your core?" Yes: ship us your supercharger and it comes back about two weeks after it arrives, return shipping included. No: we supply a pre-ported unit ready to ship, so email help@vorsprungautowerk.com to confirm availability first. Then pick the bearing rebuild and the finish: Factory, or Custom for $50 more. The $150 throttle body port add-on is done in the same service.
Fitment: Gen 1 vs CREC
The Gen 1 street port and Gen 1 race port fit the Gen 1 EA837 in the S4 (B8 2010-2012, B8.5 2013-2016), S5 (B8 Cabriolet 2010-2012, B8.5 2013-2017), Q5 3.0T (2013-2017), SQ5 (2014-2017), A6 and A7 (C7 2012-2015), A8 3.0T (D4 2013-2014) and Q7 3.0T (4L 2011-2015). The 2008-2012 S5 coupe has the 4.2 V8, so it is out.
CREC cars, meaning the A6 and A7 (C7.5 2016-2018), A8 3.0T (D4.5 2015-2018) and Q7 3.0T (4M 2017-2019), need the CREC street ported supercharger service or the CREC race ported supercharger service. Why separate? Audi's training material says the Gen 1 blower is belt driven full time with no magnetic coupling, while the CREC supercharger carries a magnetic clutch and needs extra machine work during porting.
Your engine code is on the vehicle data sticker, usually in the service booklet and the spare wheel well. Near a model-year changeover? Email your VIN first. The rest of the blower parts live in our turbo and supercharger upgrades collection.
Install Notes: Pull the Supercharger Once
The supercharger has to come off. A popular DIY guide budgets a couple of hours to remove and refit it, and an experienced owner puts a swap at an hour or two. First time in the valley? Plan a full day. Typical tools: 8mm and 13mm sockets, a 16mm wrench for the belt, T25 and T30 Torx bits, a 3/16 hex bit, picks and a torque wrench.
- ✅ Drain the intercooler coolant first and bleed the loop afterward. Our CWA-100 coolant pump guide explains that loop.
- ✅ Cover the open intake ports the moment the blower is out.
- ✅ Use new supercharger gaskets and factory torque values.
- ✅ Run a throttle body adaptation with a scan tool.
- ✅ Load your tune before you drive hard, then log boost, intake air temperature and fuel pressure.
- ✅ Email us before you box up your core.
Paying a shop? Owners report quotes of roughly $750 to $1,300 for valley jobs that need the blower off, like the PCV valve and thermostat, and one owner got the thermostat at a reduced labor rate because the supercharger was already out. So replace what lives underneath now. Our OE Ultimate Under Supercharger Kit bundles the thermostat housing, water pump, PCV valve, intake manifold gaskets and injector seals from $574.99: B8, B8.5 (also the 2013-2014 A8), C7 A6, A7 and 4L Q7, CREC, plus a 2012 C7 kit for early 2012 A6 and A7 builds. More in our PCV valve replacement guide.
Pair It With the Right Supporting Parts
- ✅ Crank pulley: the TruDrive crank pulley ($224.99 to $296.99) spins the blower faster when you want more. Our crank pulley guide covers the sizes, and your tuner should hear about the port and the pulley together.
- ✅ Throttle body: port yours with the add-on, or go bigger with the options in our 84mm throttle body guide.
- ✅ Charge cooling: one owner who logged before and after saw intake temperatures that neither skyrocketed nor dropped, so read up on supercharger intercooler brick upgrades.
Audi 3.0T Ported Supercharger FAQ
What does a ported supercharger do on an Audi 3.0T?
It re-profiles the inlet and outlet ports of the Eaton R1320 (TVS1320) case so air flows through with less restriction. The blower moves more air at the same pulley and engine speed, which is where the extra boost comes from.
Is porting a supercharger worth it?
Yes if you run a tune or want more boost without changing your pulley, especially when the supercharger is coming off for valley maintenance anyway. On a car that stays completely stock, skip it.
Should I choose the street port or the race port?
Pick the street port for a daily-driven or street-tuned car, and the race port for a built car with the tune, fueling and hardware to use the most airflow the case can deliver. Not sure? Email your mod list to help@vorsprungautowerk.com.
Do I need a tune after porting my supercharger?
There is no separate ported supercharger tune. Run a reputable Stage tune and have your tuner confirm it covers the extra airflow, especially with a smaller crank pulley. More air needs more fuel, so check your fuel system headroom too.
Will a ported supercharger change how my car drives around town?
One long-time owner reports that a ported blower feels the same as stock at part throttle. Audi's bypass flap is open at part throttle, idle and coasting and closes at wide open throttle, which is where a port shows what it can do.
How long does the ported supercharger service take?
About two weeks from the day your core arrives, return shipping included. If the car cannot sit, choose "No" under "Sending in your core?" for a pre-ported unit that is ready to ship, after confirming availability by email.
Does the service fit CREC cars?
Yes, on separate listings for the 2016-2018 A6 and A7, the 2015-2018 A8 and the 2017-2019 Q7. Their supercharger carries a magnetic clutch and needs extra machine work, so CREC ports start at $999.99 street and $1,274.99 race with your core.
The Bottom Line
Audi built a great supercharger and cast its ports for the assembly line. You can pay about $5,590 for a new one with the same ports, or fix the restriction in the blower you already own. For most street-driven S4, S5, Q5, SQ5, A6, A7, A8 and Q7 owners, the Audi 3.0T street ported supercharger service is the smart first step: about two weeks, fresh oil and return shipping included, from $749.99 with your core. Built car? Go race port. Either way, pull the blower once.
Get Your Supercharger Ported, from $749.99
Drive the difference. Drive Vorsprung.
Prices checked October 29, 2026 and subject to change. Labor figures are owner-reported shop quotes.

