Your Q7 hauls seven people, tows the boat and still has a supercharged V6 under the hood. So why does it sound like a library and shift like it is thinking it over? The right Audi Q7 3.0T upgrades fix both, if you do them in order and buy parts built for your generation. The 4L and 4M share a badge, but they run different engines, and that decides what fits. Our non-resonated Audi Q7 3.0T downpipes, for example, fit the 4M only. Here is the path.
Which Q7 3.0T Do You Have? 4L vs 4M in 30 Seconds
The supercharged 3.0T arrived in the US Q7 for 2011 on the first-generation 4L and ran through 2015. Audi skipped the 2016 model year here, then launched the redesigned 4M for 2017 with a supercharged V6 through 2019. The 2020 and newer Q7 uses a turbocharged V6, which this guide does not cover.
- ✅ 4L Q7, 2011 to 2015: Gen 1 EA837, PCV valve 06E103547AK, no clutch on the supercharger.
- ✅ 4M Q7, 2017 to 2019: Gen 2 CREC, PCV valve 06E103547AF, magnetic clutch on the supercharger.
- ✅ VIN check: the 10th character is the model year. B through F means 2011 to 2015 (4L); H, J or K means 2017 to 2019 (4M).
- ✅ Engine code: on the vehicle data sticker, usually in the service booklet and the spare wheel well.
Our CREC vs Gen 1 explainer and supercharged 3.0T engine guide go deeper.
The Q7 3.0T Upgrade Path at a Glance
In short: fix the parts under the supercharger first, then add sound, then firm up the drivetrain, then add power. Both generations share the crank pulley and the 84mm throttle body kit; the kits and porting services differ, and only the 4M gets our downpipes, transmission mount and clutch delete.
| Step | 4L Q7 (2011 to 2015) | 4M Q7 (2017 to 2019) | Tune needed (per listing) |
|---|---|---|---|
| 1. Valley service | 4L Q7 kit (06E103547AK) | Gen 2 CREC kit (06E103547AF) | None listed |
| 2. Exhaust | Not offered for the 4L | Non-resonated or resonated downpipes | No tune, no check engine light |
| 3. Drivetrain | Not offered for the 4L | TruShift V2 mount | None listed |
| 4. Crank pulley | TruDrive pulley | TruDrive pulley | None just to install; log or have your tuner check fueling and knock |
| 5. Throttle body | 84mm kit | 84mm kit | Yes |
| 6. Porting | Gen 1 street port | CREC street port | No separate port tune; a Stage tune your tuner confirms covers the airflow |
| 7. Clutch delete | No clutch to delete | Clutch delete (pre-order) | Yes |
Step 1: Recalls and the Valley Service Come First
Before you spend a dollar on speed, run your VIN through NHTSA's recall lookup. Two fuel rail campaigns, both with free fuel rail replacement at the dealer, covered certain 2011 and 2012 Q7s (Audi 24AP) and certain 4M Q7s through 2018 (Audi 24DP). Free fixes first. Then check the valley under the supercharger:
- ✅ Coolant smell or a dropping coolant level: the thermostat housing and water pump sit under the blower, and our kit listings call the factory plastic parts a notorious failure point.
- ✅ A 1 to 3 second rattle on a cold start: a Gen 1 issue Audi addressed in TSB 2039995 (see our timing chain rattle guide).
Why do the whole valley at once? An independent repair estimator puts a Q7 thermostat replacement at roughly $1,070 to $1,590 depending on the year, and as our kit listings put it, pulling the supercharger is the expensive part, not the parts. Pay for that labor once. Our 3.0T coolant leak guide and under supercharger kit chooser help you plan it.
What Comes in Each Q7 Kit
The 4L Q7 under supercharger kit ($639.99 to $709.99) includes a billet thermostat housing with thermostat, an aluminum heater pipe, a Graf metal water pump, a Rein 06E103547AK PCV valve, Elring intake manifold gaskets, the genuine 06E103213 adapter pipe and Elring injector seals.
The Gen 2 CREC under supercharger kit ($649.99) has its own parts list: a billet thermostat housing with thermostat, a Graf metal water pump, a Hengst 06E103547AF PCV valve, Elring intake gaskets, the same adapter pipe and 06E998907F injector seals. There is no heater pipe, because CREC engines do not use the plastic Gen 1 pipe.
Gen 1 cold-start rattle? The German-made oil check valve set ($109.99) lives in the same valley. Its listing covers EA837 Q7s through 2017, so 2018 and 2019 owners should send a VIN first.
Step 2: Downpipes Give the 4M Its Voice
What to Look For in Q7 Downpipes
- ✅ Fitment that names your years and engine code, not just the model name
- ✅ 304-grade stainless with mandrel bends that keep their diameter
- ✅ V-band joints that seal tight and come apart cleanly
- ✅ A straight answer on tune and check engine light
- ✅ A resonated option, because a three-row SUV lives on the highway
Our 4M downpipes check every box. The non-resonated set uses 2.5-inch mandrel-bent 304L stainless with V-band connections and no resonators, bolted to the factory mounting points on the 2017 to 2019 4M Q7 3.0T (CREC) with no cutting or welding. The factory cats stay on the car, and the listing states no tune and no check engine light. It costs $599.99, while typical name-brand 4M downpipes list from roughly $630 to $1,200. The resonated version is $699.99 and sold out at the time of writing.
| Vorsprung non-resonated | Typical name-brand 4M downpipes | Factory pipes | |
|---|---|---|---|
| Price | $599.99 | Roughly $630 to $1,200 | Dealer pricing (hello, Audi Tax) |
| Tubing | 2.5-inch mandrel-bent 304L stainless | 2.5-inch 304 stainless is common | OE front pipe with a built-in front muffler |
| Joints | V-band | V-band or bolted flanges | OE flanges with lock nuts |
| Factory cats | Stay on the car | Varies by design | Stay on the car |
| Tune and check engine light | None needed, per the listing | Varies by brand | Stock |
| Sound | Loud and aggressive | Varies | Quiet |
Ready to hear the V6 you already paid for? Grab the 4M Q7 non-resonated downpipes, or read our resonated vs non-resonated Q7 downpipes comparison if drone worries you.
Shop the Q7 Non-Resonated Downpipes, $599.99
✅ OE-supplier parts from Graf, Hengst, Elring, Rein and VDO · ✅ Fitment help by VIN at help@vorsprungautowerk.com · ✅ Free US shipping on orders over $425
For off-road and competition use. Check your local emissions and inspection rules before modifying your exhaust.
On a 4L? Our Q7 downpipes fit the 4M only, so skip ahead to Step 4.
Step 3: Firm Up the 4M Drivetrain
Clunk from Park into Drive, a bang on quick shifts, a rubbery pause before the Q7 moves? The listing calls a tired factory transmission mount the usual suspect. The TruShift V2 transmission mount ($74.99) uses firmer 70A durometer rubber and bolts in with no modifications, without the idle buzz of a poly-bushed billet mount, which typically runs well over $300. It fits the 2017 to 2019 4M Q7 and the 2020 to 2024 4M.5 Q7 and Q8, not the 4L. Our transmission mount guide covers insert vs full mount.
Step 4: Add Power the Right Way
Both generations share two power parts:
- ✅ TruDrive crank pulley ($224.99 to $296.99): stainless hub and lightweight aluminum ring in four sizes, listed for the 4L and 4M. No dedicated tune just to install, per the listing, but log or have your tuner confirm fueling and knock.
- ✅ 84mm throttle body upgrade kit: throttle body, billet adapter, gaskets and harness for both generations, $349.99 with the VDO OEM unit (the $219.99 Luft-Strom option is sold out at the time of writing). The listing says it needs a tune.
Porting splits by generation: the Gen 1 street port for the 4L (from $749.99 with your core) and the CREC street port for the 4M (from $999.99 with your core, since CREC cores need extra machine work). Both listings say there is no separate port tune: start with a reputable Stage tune your tuner confirms covers the extra airflow. Turnaround is about two weeks from when your core arrives, or buy a pre-ported unit.
4M only: our billet supercharger clutch delete ($179.99) replaces the CREC supercharger's magnetic clutch with a solid 7075 aluminum puck. It is a pre-order with stock arriving late November 2026 and a supercharger-off job, and the listing is blunt: you will need a tune, or the car sets a check engine light. Pair it with porting and the valley kit. Our 3.0T upgrade path, crank pulley, 84mm throttle body and ported supercharger guides go deeper.
Fitment: Which Parts Fit Which Q7
4L Q7 3.0T, 2011 to 2015, Gen 1 EA837: the 4L under supercharger kit and the Gen 1 street port, plus the shared pulley and 84mm kit.
4M Q7 3.0T, 2017 to 2019, CREC: the CREC kit, the CREC street port, the Q7 downpipes, the TruShift V2 and the clutch delete, plus the shared pulley and 84mm kit.
Not covered: the 2.0T, the 3.0 TDI and the 2020 and newer turbo Q7 (the TruShift V2 does list the 4M.5). Browse the Audi Q7 4L and 4M 3.0T performance parts collection, and email your VIN to help@vorsprungautowerk.com if you are unsure.
Install Notes: Time, Tools and Tips
- ✅ Valley service: the supercharger comes off, so budget real shop time and do the kit, check valves, porting and (on a 4M) the clutch delete in one visit.
- ✅ Downpipes: factory mounting points, no cutting or welding, and a lift makes it much easier. Audi lists the factory front pipe lock nut and gasket as non-reusable, so have fresh ones ready.
- ✅ TruShift V2: support the transmission, swap the mount and torque to the spec sheet linked on the listing.
- ✅ Crank pulley: follow the listing's staged pulley-to-hub steps with blue thread locker, and keep a fresh belt on hand.
- ✅ Tune: book your tuner before the throttle body, porting or clutch delete goes on.
Audi Q7 3.0T Upgrades FAQ
Which Audi Q7 years have the supercharged 3.0T?
In the US, the 2011 to 2015 4L and the 2017 to 2019 4M. There was no 2016 model year Q7 here, and the 2020 and newer Q7 uses a turbocharged V6.
How do I tell if my Q7 is a 4L or a 4M?
Check the 10th character of the VIN. B through F means a 2011 to 2015 4L with the Gen 1 engine; H, J or K means a 2017 to 2019 4M with the CREC engine. The vehicle data sticker shows the engine code.
What should I upgrade first on a Q7 3.0T?
Reliability. Check for open recalls, then replace the thermostat housing, water pump, PCV valve and seals under the supercharger with the kit for your generation. Sound, drivetrain and power come after.
Do the Q7 downpipes need a tune or cause a check engine light?
Not according to the listing. They bolt in after the factory catalytic converters, which stay on the car, so the listing states no tune and no check engine light. Check your local emissions and inspection rules first.
Do A6 and A7 3.0T parts fit my Q7?
Some do. The 4L Q7 kit is shared with the May 2012 to 2015 C7 A6 and A7, and the 4M shares the CREC kit, the CREC street port and the TruShift V2 with the C7.5 A6 and A7. The downpipes are Q7 only.
Does my 4M Q7 need a supercharger clutch delete?
Only if your build and your tuner call for one. Its listing says you will need a tune or the car sets a check engine light, and stock arrives late November 2026.
Do I need a tune for a crank pulley or an 84mm throttle body on a Q7?
The pulley listing says no dedicated tune just to install, though it recommends logging fueling and knock. The 84mm throttle body kit listing says yes.
Bottom Line
The best Audi Q7 3.0T upgrades start with the boring stuff: recalls, then the valley under the supercharger with the kit for your generation. On a 4M, the non-resonated Q7 3.0T downpipes come next, giving the supercharged V6 a voice for $599.99 with no tune per the listing, then the mount and the power parts. On a 4L, start with the 4L Q7 under supercharger kit, then the pulley, throttle body and port. Either way, skip the Audi Tax.
Shop the Q7 Non-Resonated Downpipes, $599.99
Drive the difference. Drive Vorsprung.
Prices checked November 5, 2026 and subject to change. Repair cost figures are typical independent estimates, not quotes.


