Audi 3.0T Tech Guides & News

Audi 3.0T Upgrade Path: The Right Mod Order, From Reliability to Stage 2 and Beyond (S4, S5, Q5, SQ5, A6, A7, A8, Q7)

Audi 3.0T upgrade path: Vorsprung TruDrive crank pulley for the supercharged S4, S5, Q5, SQ5, A6, A7, A8 and Q7

Every supercharged Audi 3.0T owner hits the same fork in the road: tune it, pulley it, port it, or fix the parts that are about to leak? This Audi 3.0T upgrade path puts the whole platform in order, from the valley service to the crank pulley, porting, exhaust and mounts, for the S4, S5, Q5, SQ5, A6, A7, A8 and Q7. The short version: make it reliable, then make it fast. Once the basics are sorted, the first big hardware step in most stage lists is a pulley, and ours is the TruDrive Audi 3.0T crank pulley upgrade.

Why the Order Matters on a Supercharged 3.0T

The EA837 is a strong V6 with a plastic-parts habit and a packaging problem: the supercharger sits right over the thermostat housing, water pump, PCV valve, intake manifold gaskets and injector seals. Add power first and fix leaks later, and you pay for that teardown twice. Signs your car isn't ready yet:

  • ✅ Coolant smell, a dropping expansion tank or residue around the valley. The factory plastic cooling parts are well-known failure points.
  • ✅ A 1 to 3 second rattle on cold starts: oil has drained from the timing chain tensioners.
  • ✅ Whistles, a rough idle or lean codes, classic PCV valve trouble.
  • ✅ A strong first pull and a soft third: heat soak in the intercooler loop.
  • ✅ Clunks on and off the throttle: tired engine mounts.

Sound familiar? The power parts can wait a weekend. Our Audi 3.0T maintenance schedule lists the factory intervals and what tends to fail first.

Audi 3.0T Stage 1, Stage 2 and Stage 3: What Tuners Usually Mean

Stage names aren't a standard; each tuner defines them by the parts its software expects. On the supercharged 3.0T they commonly look like this:

  • ✅ Stage 1: a software tune on stock hardware, often with an optional intake.
  • ✅ Stage 2: a pulley change on a matched tune, meaning a smaller supercharger pulley, a larger crank pulley, or both (dual pulley). Tuners commonly require or recommend a heat exchanger upgrade and a transmission tune alongside the more aggressive setups.
  • ✅ Stage 2+ and Stage 3: fuzzy labels for builds that stack a larger throttle body, a ported supercharger, exhaust changes and fuel upgrades on top of the pulleys.

Ask your tuner which parts their file expects before you buy anything, and see our Audi supercharger upgrade guide for pulley and porting combinations.

The Audi 3.0T Upgrade Path at a Glance

Five steps, in order: the reliability baseline (valley service, cooling and check valves), the crank pulley and throttle body, porting, exhaust, then mounts and chassis. The tune column quotes our listings, so you know where your tuner comes in.

Step Parts Tune needed (per our listings) Deep dive
1. Reliability baseline Valley kit, oil check valves, CWA-100 intercooler pump Kit and valves: none stated. CWA-100: no, it uses the factory PWM control. Valley service guide
2. Pulley and throttle body TruDrive crank pulley, Luft-Strom 84mm throttle body kit Pulley: none required just to install it; confirm fueling and knock. Throttle body: yes. Crank pulley guide
3. Porting Gen 1 or CREC street port No separate ported tune. Have your tuner confirm your Stage tune covers the extra airflow. Ported supercharger guide
4. Exhaust Test pipes V2 or HEH Headers V2 Test pipes: strongly recommended. Headers: recommended once stacked with other mods. Headers guide
5. Mounts and chassis DynaCore TruSport 65A engine mounts No Engine mounts guide

Ready for step 2? The TruDrive crank pulley for the supercharged 3.0T comes in four ring sizes on one modular hub, from $224.99 to $296.99.

Shop Audi 3.0T Performance Parts, All Models

✅ Graf, Hengst, Elring, Pierburg and VDO parts in our listings  ·  ✅ Fitment help by VIN at help@vorsprungautowerk.com  ·  ✅ Free US shipping on orders over $425

Step 1: Build the Reliability Baseline

Valley Service: Do It Once

Everything that likes to leak on this engine lives under the supercharger, so the smartest first “mod” is a full valley service. For scale, one national repair-cost estimator puts a 2013 S4 thermostat replacement alone at roughly $1,000 to $1,400. Why pay for that teardown three times?

Our OE Ultimate Under Supercharger Kit for the Gen 1 B8.5 3.0T ($649.99 to $719.99, depending on options) bundles:

  • ✅ A complete billet thermostat housing with thermostat (replaces 06E121111AL) and an aluminum heater pipe (replaces 06E121065N)
  • ✅ A Graf metal water pump (replaces 06E121018N)
  • ✅ A Hengst PCV valve (06E103547AH) and the PCV-to-supercharger adapter pipe (06E103213)
  • ✅ Elring upper and lower intake manifold gaskets and an Elring injector seal kit (06E998907E)

It fits the 2013 to 2016 S4, the 2013 to 2017 S5 and Q5 3.0T, the 2014 to 2017 SQ5 and the 2013 to 2014 A8 3.0T. Other cars have their own kits in our under supercharger kits collection, and our Audi 3.0T PCV valve replacement guide walks through the job.

OE Ultimate Under Supercharger Kit for the Audi 3.0T Gen 1 B8.5 S4, S5, Q5 and SQ5 with billet thermostat housing, water pump, PCV valve, heater pipe and gaskets

Cooling: Fight Heat Soak Before You Add Heat

The supercharger's intercoolers dump heat into a separate coolant loop driven by a small electric pump, a Pierburg CWA-50 from the factory. If charge air gets too hot, the ECU cuts power, and every later step adds heat.

  • ✅ Pump: our CWA-100 coolant pump upgrade comes as a genuine Pierburg CWA-100 ($299.99) or our VWA-100 ($179.99). No tune needed, per the listing, since it runs on the factory PWM signal. It's pump only, so the EA837 also needs an adapter harness.
  • ✅ Heat exchanger: tuners commonly require or recommend a bigger one for aggressive pulley setups. See our Audi heat exchanger upgrade guide.
  • ✅ Proof: log intake air temperatures before and after, as our intake air temperature gauge guide shows.

Bleeding the loop is covered in our CWA-100 coolant pump upgrade guide.

Check Valves: Silence the Cold-Start Rattle While You're In There

That 1 to 3 second clatter on a cold start? Oil drains out of the timing chain tensioners while the car sits. The two oil check valve ports sit under the PCV valve (many B8.5 cars have blank plugs there), so they belong in the valley service. Our German-made 3.0T oil check valve set is $109.99 for both and is listed for the S4, S5, SQ5, A6, A7 and Q7. Our Audi 3.0T timing chain rattle guide explains when the noise is a quirk and when it's a problem.

Step 2: Crank Pulley and 84mm Throttle Body

With the foundation solid, it's time for parts you can feel. On a supercharged engine, blower speed drives boost, and the pulleys set blower speed.

TruDrive Crank Pulley

On the crank, a larger pulley spins the supercharger faster. Our TruDrive Audi 3.0T crank pulley pairs a stainless steel inner hub with a CNC-machined aluminum outer ring, with 12.9-grade hardware and blue threadlocker included. It comes in 179mm ($224.99), 187mm ($251.99), 193mm ($278.99) and 207mm ($296.99), from mildest to most aggressive, all on the same modular hub, so stepping up later means a new ring, not a new pulley.

Tune, per the listing: no dedicated tune is required just to install it. It raises supercharger speed and boost across the rev range, so log the car or have your tuner confirm that your fueling and knock levels can support it. Keep a fresh supercharger belt on hand and check your tensioner's remaining travel. Our Audi 3.0T crank pulley guide covers sizing and install.

Two TruDrive crank pulleys with aluminum outer rings bolted to stainless hubs for the supercharged Audi 3.0T S4, S5, Q5, SQ5, A6, A7, A8 and Q7

Luft-Strom 84mm Throttle Body Kit

The Luft-Strom 84mm throttle body upgrade kit puts the swap in one box: an 84mm throttle body (genuine VDO at $349.99 or our Luft-Strom design at $219.99), a billet adapter tapped for methanol injection, a gasket set and a plug-and-play harness. Choose a stock or ported supercharger opening at checkout.

Tune, per the listing: yes. A bigger throttle body changes how much air moves at a given pedal position, so budget for a tune. Our Audi 3.0T 84mm throttle body guide covers kit options and fitment.

Step 3: Port the Supercharger

Porting re-profiles the inlet and outlet ports of the Eaton R1320 (TVS1320) case so the blower moves more air at the same pulley and rpm. The supercharger has to come off, so if the valley is already open, port it then. Can't park the car for the roughly two-week turnaround? The listings also offer pre-ported units.

Tune, per the listings: there is no separate “ported supercharger” tune. Start with a reputable Stage tune, have your tuner confirm it covers the extra airflow, and check your fuel system headroom. Our Audi 3.0T ported supercharger guide compares the street and race ports.

Step 4: Exhaust, Test Pipes or Headers

For off-road and competition use. Check your local emissions and inspection rules before modifying your exhaust.

The factory front catalytic converters sit in the front pipes, right off the exhaust manifolds, so this step is a choice between two parts that occupy the same spot:

  • ✅ Audi S4 Test Pipes V2, $449.99: they replace the factory front catalytic converters between the manifolds and the downpipes. 2.0mm T304 stainless, mandrel bent, dual-layer heat shields, gaskets and hardware included.
  • ✅ HEH Headers V2, $1,599.99 Standard or $1,999.99 Dual Layer: equal length, 321L stainless, TIG welded and back purged, and per the listing they replace the manifold and the test pipe section.

Tune, per the listings: for the test pipes, a tune that accounts for the removed converters is strongly recommended. Headers alone don't need one, but it's recommended once you add a port, a pulley or other exhaust changes.

Both are big jobs: owners lower the drivetrain or subframe to reach the factory cats, so read our Audi 3.0T headers guide and Audi S4 test pipes install guide first. Keeping converters on the car? See our test pipes vs high flow cats comparison and high flow cat legality guide.

Step 5: Engine Mounts and Chassis

More power twists the engine harder on its mounts, and the factory fluid-filled mounts put comfort ahead of control. Our DynaCore TruSport 65A engine mounts wrap firm 65A rubber around a tuned fluid core and plug into the factory N144 and N145 active mount connectors. They're $249.99 a pair right now, marked down for cosmetic paint blemishes.

  • ✅ Fits: the B8 and B8.5 S4, S5, Q5 3.0T and SQ5, the C7 and C7.5 A6 and A7, and the D4 A8 3.0T. The Q7 isn't listed.
  • ✅ Tune: none. The listing calls it a drop-in with no modification or tuning required.
  • ✅ Install: about 4 to 5 hours for an experienced tech, per the listing, with an engine support bar, and many owners lower the front subframe for access. Replace both sides and the transmission mount in the same visit.

DynaCore TruSport 65A engine mount in a blue aluminum housing for the Audi B8 and B8.5 S4, S5, Q5, SQ5, C7 A6, A7 and D4 A8 3.0T

Doing headers in the car? Owners report that route takes both engine mounts out anyway. Our Audi B8 S4 engine mounts guide compares options, and our Audi transmission mount upgrade guide covers the gearbox end.

Plan the Labor: Group Jobs by Teardown

Here's the real Audi Tax on this platform: not the parts, the hours. Group jobs that share a teardown and you pay for the disassembly once.

Audi 3.0T upgrade path planned by teardown Five upgrade steps in order: reliability baseline, pulley and throttle body, ported supercharger, test pipes or headers, and engine mounts. One arc joins the valley service and porting because both need the supercharger off. A second arc joins the exhaust and engine mounts because both mean lowering the drivetrain or subframe.AUDI 3.0T UPGRADE PATH, PLANNED BY TEARDOWNSteps run left to right. Arcs join jobs that share the same teardown.12345RELIABILITYBASELINEPULLEY ANDTHROTTLE BODYPORTEDSUPERCHARGERTEST PIPES ORHEADERSENGINE MOUNTSAND CHASSISvalley and coolingfront of engineGen 1 or CRECoff-road use onlyboth sides at onceSUPERCHARGER OFFvalley kit, check valves, portingDRIVETRAIN OR SUBFRAME DOWNexhaust, then engine mounts12345Valley kit, check valves, intercooler pumpCrank pulley, then 84mm throttle bodyGen 1 or CREC street portTest pipes or headers, off-road use onlyEngine mounts, then transmission mountTune needs: see the step tableSCHEMATIC ONLY, NOT TO SCALE.
Arcs join jobs that share a teardown: valley service and porting both need the supercharger off, and exhaust and engine mounts both mean lowering the drivetrain or subframe.
  • ✅ Supercharger off: valley kit, check valves and porting.
  • ✅ Front of the engine: crank pulley, belt, tensioner and throttle body.
  • ✅ Drivetrain or subframe down: test pipes or headers, then the engine and transmission mounts.
  • ✅ After every step: log intake temperatures, fueling and knock.

Audi 3.0T Upgrade Path Fitment: Gen 1 vs CREC by Model

Everything above is for the supercharged EA837 3.0T, not the turbocharged EA839 in the B9 S4 and S5. Your engine code is on the vehicle data sticker, usually in the service booklet and the spare wheel well. Per our listings, the crank pulley, throttle body kit, test pipes, headers and DynaCore mounts all cover the S4, S5, Q5, SQ5, A6, A7 and D4 A8, so the differences come down to the valley kit, the port and the Q7:

  • ✅ S4 (2010 to 2016), S5 (2010 to 2012 Cabriolet, 2013 to 2017), Q5 3.0T (2013 to 2017) and SQ5 (2014 to 2017): Gen 1 port. 2013 and later cars take the B8.5 valley kit, earlier cars the B8 kit.
  • ✅ A6 and A7: 2012 to 2015 cars are Gen 1 (Gen 1 port, C7 valley kits, and early 2012 cars differ, so check by VIN). 2016 to 2018 cars are CREC (CREC port, Gen 2 valley kit).
  • ✅ A8 3.0T: 2013 to 2014 is Gen 1 (B8.5 valley kit, Gen 1 port), and 2015 to 2018 is CREC (Gen 2 valley kit, CREC port).
  • ✅ Q7: the 2011 to 2015 4L is Gen 1 (C7 valley kit, Gen 1 port) and the 2017 to 2019 4M is CREC (Gen 2 valley kit, CREC port). The pulley and throttle body fit both, but these test pipes, headers and mounts don't list the Q7, so see our Audi Q7 4L and 4M parts.

Not sure which engine you have? Our Audi 3.0T supercharged engine guide explains Gen 1 versus CREC, or email your VIN to help@vorsprungautowerk.com. S4 owners can also follow our Audi S4 mods roadmap.

Audi 3.0T Upgrade Path FAQ

What is the right Audi 3.0T upgrade path?

Reliability first, then power: the valley service, cooling and check valves, then the crank pulley and throttle body, then porting, exhaust, and finally mounts and chassis. Group jobs that share a teardown so you pay for the labor once.

What should I fix before tuning a supercharged Audi 3.0T?

Everything under the supercharger: the thermostat housing, water pump, PCV valve, intake manifold gaskets and injector seals, plus the oil check valves if it rattles on cold starts. Then make sure the intercooler loop keeps up.

What are Audi 3.0T Stage 2 mods?

Stage names vary by tuner, but Stage 2 usually means a pulley change on a matched tune: a smaller supercharger pulley, a larger crank pulley or both, often with a heat exchanger upgrade and a transmission tune.

Do I need a tune for a crank pulley on the 3.0T?

Per our TruDrive listing, no dedicated tune is required just to install the pulley. It raises supercharger speed and boost, so log the car or have your tuner confirm that your fueling and knock levels can support it.

Should I port the supercharger or upgrade the pulley first?

Stage lists usually put the pulley first. But if the supercharger is already off for a valley service, the porting labor overlaps, and a pre-ported unit means no waiting on your core.

Does this upgrade path work for CREC cars?

Yes. The 2016 to 2018 A6 and A7, the 2015 to 2018 A8 and the 2017 to 2019 Q7 carry the CREC engine, so they take the CREC street port and the Gen 2 valley kit. Our pulley and throttle body listings cover both engines.

Can I run test pipes or headers on the street?

Our test pipes and headers are sold for off-road and competition use only and are not designed to meet emissions standards. Check your local emissions and inspection rules before you modify your exhaust.

When should I upgrade the engine mounts?

When the car is tuned, when the factory mounts show wear, or whenever the drivetrain comes down for exhaust work. Replace both sides together, and do the transmission mount in the same visit.

Bottom Line on the Audi 3.0T Upgrade Path

Fix the valley, cool the loop, then add blower speed. That's the Audi 3.0T upgrade path in one breath, and it keeps the Audi Tax on labor to one payment per teardown. When the basics are done, start step 2 with our TruDrive crank pulley for the Audi 3.0T and let your tuner's parts list steer the rest.

Shop the TruDrive Crank Pulley, $224.99 to $296.99

Drive the difference. Drive Vorsprung.

Prices checked November 1, 2026 and subject to change. The repair-cost figure is a typical estimate, not Vorsprung pricing, and install times are listing estimates that vary by shop.

Previous
Audi 3.0T Headers: Long-Tube vs Shorty, What to Look For and What Install Really Takes (S4, S5, Q5, SQ5, A6, A7, A8)
Next
Audi 3.0T Under Supercharger Kit: Which One Fits, What's Inside and What Else to Replace (S4, S5, Q5, SQ5, A6, A7, A8, Q7)