Looking for Audi A6 3.0T upgrades that make your supercharged C7 feel as quick as it looks? The 2012 to 2018 A6 and A7 3.0T share the S4's supercharged V6 family, just in a bigger, quieter car. The catch is the order: bolt power parts onto a tired thermostat, PCV valve and set of mounts, and you pay for the same labor twice. Here is the right sequence for the C7 and C7.5, from what to fix first to our hand-built titanium intake for the C7 and C7.5 A6 and A7 3.0T. For every other supercharged chassis, see our Audi 3.0T upgrade path.
Which A6 or A7 3.0T Do You Have? C7 Gen 1 vs C7.5 CREC
The 2012 to 2015 C7 cars carry the Gen 1 EA837 3.0T. The 2016 to 2018 C7.5 facelift brought new styling, new LED lighting and an enhanced 3.0T with the CREC engine code. For 2019, the all-new C8 A6 switched to a turbocharged V6, so nothing here fits it.
The PCV valve splits once more inside 2012: built before May 2012 means 06E103547AC, May 2012 through 2015 means 06E103547AK, and CREC cars use 06E103547AF. Find the build month on the driver's door jamb sticker and the engine code on the vehicle data sticker in the spare wheel well, or read our CREC vs Gen 1 guide.
Signs Your A6 Needs the Baseline First
The thermostat, water pump and PCV valve live in the valley under the supercharger, which must come off to reach them. Watch for:
- ✅ A coolant smell or a level that keeps dropping (see our 3.0T coolant leak guide)
- ✅ A check engine light for PCV valve performance
- ✅ A few seconds of rattle on cold start (see our timing chain rattle guide)
- ✅ Vibration at idle or a clunk into Drive, usually the mounts
In one long-running C7 owner thread, thermostats and water pumps went around 50,000 to 70,000 miles and engine mounts between roughly 47,000 and 80,000. An independent estimator puts a 2012 to 2015 A6 thermostat job at roughly $1,000 to $1,340, and owners report dealers billing about 5 hours of labor for it. Hello, Audi Tax. Our supercharged 3.0T engine guide lists every weak spot.
The Audi A6 3.0T Upgrade Path, Step by Step
The order we recommend, with each part's tune requirement taken from its listing:
| Step | 2012 to 2015 C7 (Gen 1) | 2016 to 2018 C7.5 (CREC) | Tune, per listing |
|---|---|---|---|
| 1. Valley baseline | 2012 C7 kit before 05/2012 (AC valve); C7 kit from 05/2012 (AK valve) | Gen 2 CREC kit (AF valve) | None listed |
| 2. Intake | C7 titanium intake | Same intake | Not required to install |
| 3. Pulley and throttle body | TruDrive pulley, 84mm throttle body kit | Same, plus optional clutch delete | Pulley: log first. Throttle body and clutch delete: yes |
| 4. Ported supercharger | Gen 1 street port | CREC street port | Confirm your tune covers it |
| 5. Drivetrain | TruShift V2, DynaCore mounts, subframe and diff inserts | TruShift V2, DynaCore mounts (inserts: VIN check) | None |
Step 1: Do the Valley Once
Original thermostat, water pump and PCV valve? Start here. Our kits bundle everything under the blower for your build date: the 2012 C7 under supercharger kit ($674.99) for cars built before May 2012, the C7 A6 and A7 kit ($639.99) from May 2012 through 2015 and the Gen 2 CREC kit ($649.99) for 2016 to 2018. Each pairs a billet thermostat housing and thermostat with a Graf metal water pump, the correct PCV valve, Elring manifold gaskets and injector seals. Compare them in our under supercharger kit chooser.
Step 2: Let It Breathe
With the valley sorted, the intake is the easiest bolt-on here. Our titanium intake for the C7 and C7.5 A6 and A7 ($299.99) fits both generations and, per its listing, needs no tune to install.
Step 3: Crank Pulley and 84mm Throttle Body
Here the A6 wakes up and your tuner joins in. The TruDrive crank pulley ($224.99 to $296.99, four ring sizes on one stainless hub) spins the supercharger faster; per its listing, it needs no dedicated tune to install, though you should log fueling and knock. The 84mm throttle body upgrade kit ($349.99 with the genuine VDO unit, adapter and harness) needs a tune. CREC cars have a magnetic supercharger clutch, which our billet clutch delete ($179.99, pre-order, stock due late November 2026) swaps for a solid puck; it needs a tune too, or the car sets a check engine light.
Step 4: Port the Supercharger
Porting reshapes the inlet and outlet ports of the Eaton R1320 case for a smoother airflow path. Gen 1 cars use the Gen 1 street port (from $749.99 with your core), CREC cars the CREC street port (from $999.99, extra machine work). Both quote about 2 weeks from core arrival, return shipping included; have your tuner confirm your file covers the extra airflow. Money tip: pair it with step 1, using a pre-ported unit if you can't wait, and pull the supercharger once. More in our ported supercharger guide.
Step 5: Tighten the Drivetrain
The TruShift V2 transmission mount ($74.99) swaps the soft factory mount on the ZF 8-speed Tiptronic for firmer 70A rubber, with vibration its listing calls slight and daily drivable. The DynaCore TruSport 65A engine mounts ($249.99 a pair, cosmetic paint blemishes) include plug-in emulators for cars with active mounts, with no tune or coding. The C7 billet subframe inserts ($79.99, front and rear pairs) and rear differential carrier inserts ($44.99, quattro only) fill the voids in the factory bushings. Wheels next? See our forged wheels buying guide.
Exhaust comes last; see our 3.0T headers guide. For off-road and competition use. Check your local emissions and inspection rules before modifying your exhaust.
What to Look for in an A6 3.0T Intake
- ✅ A heat-tolerant tube and a real heat shield: a supercharged V6 cooks its engine bay.
- ✅ A filter for the secondary air (SAI) hose, which clips into the bottom of the factory airbox.
- ✅ The right throttle body coupler, plus a path to an 84mm unit.
- ✅ Straight tune guidance before you buy.
- ✅ Fitment that names your car: C7 or C7.5, A6 or A7.
Titanium Intake vs Typical Name-Brand Intakes vs the Factory Airbox
Our C7 titanium intake is $299.99 for a hand-built CP1 titanium pipe (89mm, or 3.5 inches), a high-flow filter, a heat shield, an SAI filter and a factory-size throttle body coupler. Typical name-brand intakes for this car run roughly $280 to $500 at the time of writing, in powder-coated aluminum or silicone. The factory airbox is free but keeps the stock filter element and ducting.
| Vorsprung titanium intake | Typical name-brand intakes | Factory airbox | |
|---|---|---|---|
| Tube | Hand-built CP1 titanium, back-purged welds | Powder-coated aluminum or silicone | Factory airbox and intake hose |
| Heat management | Custom-fit heat shield and air guide | Aluminum or carbon fiber shield, or an enclosed box | Enclosed factory box |
| SAI filter | Included, with bracket | Usually included | Hose clips into the box |
| Tune to install | Not required, per listing | Varies by brand | None |
| Price | $299.99 | About $280 to $500 | Already on the car |
Titanium for less than many aluminum and silicone kits: that is the pitch of our hand-built C7 A6 and A7 titanium intake.
Shop the C7 Titanium Intake, $299.99
✅ OE-supplier parts from Graf, Hengst, Elring, Rein and VDO · ✅ Fitment help by VIN at help@vorsprungautowerk.com · ✅ Free US shipping on orders over $425
What's in Our C7 Titanium Intake Kit and Why
- ✅ Hand-built CP1 titanium pipe, pie-cut and hand-welded with back-purged welds
- ✅ High-flow 3.5 inch performance filter
- ✅ Coupler sized for your factory throttle body
- ✅ SAI filter with mounting bracket, so the secondary air hose keeps a filter once the airbox is gone
- ✅ Custom-fit heat shield and air guide
- ✅ All the installation hardware
Why titanium? Per the listing, it shrugs off heat and corrosion, needs no coating to flake and allows thinner walls for less weight up front, plus a sharper supercharger whine. Adding the 84mm throttle body? Its kit listing calls our titanium intakes a direct match. Each intake is hand-built, so if it shows sold out, email help@vorsprungautowerk.com about timing.
A6 and A7 3.0T Fitment, Year by Year
A 2012 C7 built before May 2012 takes the 2012 C7 under supercharger kit (06E103547AC) and the Gen 1 street port. A C7 built from May 2012 through 2015 takes the C7 A6 and A7 kit (06E103547AK, listed for the A6 and the A7 quattro) and the same port. A 2016 to 2018 C7.5 takes the Gen 2 CREC kit (06E103547AF), the CREC street port and the optional, CREC-only clutch delete.
Both generations share the C7 and C7.5 titanium intake, TruDrive pulley, 84mm throttle body kit, TruShift V2 and DynaCore mounts. The subframe and diff inserts are listed for the C7 chassis, so 2016 to 2018 owners should email their VIN first. The 4.0T S6, S7 and RS7 only share the chassis parts that name them. Q7 owner? See our Q7 3.0T upgrades guide.
Install Notes: Time, Tools and Tips
Intake: about an hour, per published install guides for C7 intakes. Bring a trim tool, a flathead screwdriver, T25 and T27 Torx bits and small sockets. Unclip the fuel and vacuum lines from the factory intake hose, lift the airbox off its grommets, then squeeze the SAI hose tabs and pull straight down so the plastic fitting doesn't crack. Snug the clamps without overtightening and check for leaks or rubbing.
Valley job: one owner did the water pump, thermostat and supercharger gaskets on a 2012 C7 in about 4 hours with a full Torx set and a flat breaker bar, sliding the radiator forward with a helper instead of pulling the bumper. First-timers should budget longer or book a shop.
Mounts: TruShift V2 bolts in with the transmission supported, tightened to the spec sheet on its listing. Engine mounts need an engine support bar; one C7 owner was quoted 6 to 7 hours by an independent shop. More in our transmission mount upgrade guide.
Audi A6 3.0T Upgrades FAQ
Is the Audi A6 3.0T supercharged?
Yes. The 2012 to 2018 C7 and C7.5 A6 and A7 3.0T use a supercharged V6: Gen 1 EA837 through 2015 and CREC from 2016. The 2019 C8 A6 switched to a turbocharged V6, so these parts don't fit it.
What should I upgrade first on an A6 3.0T?
The parts under the supercharger, if original. Then the intake, the pulley and throttle body with a tune, porting and mounts, ideally porting during the valley job so the supercharger comes off once.
Do I need a tune for the titanium intake?
Not just to install it, per the listing. If you stack it with a throttle body upgrade or porting, confirm your fueling and tune can support the added airflow.
How do I know if my A6 or A7 has the CREC engine?
2016 to 2018 C7.5 cars have CREC; 2012 to 2015 cars have Gen 1. A 10th VIN character of G, H or J means 2016 to 2018, and the engine code is on the vehicle data sticker in the spare wheel well. Unsure? Email your VIN.
Which under supercharger kit fits a 2012 A6 or A7?
It depends on the build month on the driver's door jamb sticker. Built before May 2012: the 2012 C7 kit with 06E103547AC. Built in May 2012 or later: the C7 kit with 06E103547AK.
Can I delete the supercharger clutch on a 2015 A6?
No. Only the CREC supercharger in 2016 to 2018 cars has the magnetic clutch, so our clutch delete fits CREC cars only, and it needs a tune.
Bottom Line
The best Audi A6 3.0T upgrades follow one rule: fix the valley first, then add air, then supercharger speed with a tune, then make the drivetrain keep up. Start with the kit for your build date, add our hand-built titanium intake for the C7 and C7.5 A6 and A7, and save the pulley, throttle body and porting for when your tuner is ready.
Shop All C7 A6 and A7 3.0T Parts
Drive the difference. Drive Vorsprung.
Prices checked November 6, 2026 and subject to change. Labor figures are owner-reported or typical shop quotes.


